ParkerVision WR1500 quick start Pptp Configuration

Page 16

®

17

WR1500 4-Port Wireless DSL/Cable Router

 

name with their domain designation, such as

 

user@bellsouth.net

Password

Type the password associated with the User

 

Name above.

Nailed Up

Select Nailed Up Connection if you do not

Connection

want the connection to time out.

Idle Timeout

Type the time in seconds that elapses

 

before the WR1500 Wireless Router

 

automatically disconnects from the PPTP

 

server.

PPTP Configuration

My IP Address

Type the (static) IP address assigned to you by

 

your ISP.

My IP Subnet

Type the subnet mask assigned to you by your

Mask

ISP (if given).

Server IP Address

Type the IP address of the PPTP server.

Connection

If your ISP has provided a connection

ID/Name

ID name, enter it in this fi eld exactly

 

as provided.

Continued next page

Image 16
Contents Guide Package Contents Installation Next Changing the IP Address Make the connections as described below Rear panel of the WR1500 contains several ports, as shownEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Wizard Setup Wireless LAN Setup Set up your wireless LAN using the wizard screen belowAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Encapsulation PptpPptp Configuration PPPoE Encapsulation Wizard Wizard Setup WAN and DNS WAN IP Address AssignmentIP Address and Subnet Mask DNS Server Address Assignment WAN MAC AddressWizard WR1500 4-Port Wireless DSL/Cable Router Basic Setup of Your WR1500 is Now Complete Saving and Restoring Your ConfigurationProcedure to Use the Reset Button Problem Corrective Action Problems with the Ethernet Interface Troubleshooting the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT