Perfectone Net Ware GW-200 manual Audio settings

Page 17

GW-200 User Manual

￿Dualmode prefix: This setting no need to set at moment.

￿￿ring type: This setting no need to set at moment.

￿Use digitmap: Enable/disable digit map by checking/unchecking the box.

￿Call waiting: Enable/disable call waiting by checking/unchecking the box.

￿forward number: Enter receiving forwarded calls phone number into this field.

￿fwd poweroff: Forward calls if power off by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

￿fwd noanswer: Forward calls without replying by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

￿fwd always: Forward all calls by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

￿fwd busy: Forward calls if busy by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

￿answer: Enter a number from 0 through 60 to set the entries of the seconds before the phone answer the call auto or forward the calls.

Audio settings:

Fig 3.5 Audio Setting

17

Image 17
Contents Page Page Breif Introduction and how-to-start information If you are using Dhcp IP addressingIf you are not using Dhcp IP addressing Software HardwareSize Operating requirementsElectric requirements Installation Configure by Web browser Configuration   Network SettingPage Protocol Setting Page System Page Phonesettings Page Beiing 10 Shanghai Audio settings Options are g729 g7231 g711u g711a and gsm Other settingsPage Page GW-200 V1.40 settings Password Telnet ConfigurationCommand Function GW-200 Gateway Telnet Commands ExplanationDetail description of GW-200 Telnet commands Command ? SetRelevant usage None Detailed description Command getDetailed description GW-200 V1.40 settings Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet dns Set dns2Set serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet phonenumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dtmf payload Set dtmfSet dialplan Set dialnumberSet dddprefix Set iddprefixSet innerline Set innerlinepreifxSet ringtype Set fwdpoweroffSet digitmap Set fwdnumberSet 6.3k Set audioframesSet vad Set agcSet superpassword Set passwordSet codec1 Set codec2Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitCommand ping Syntax description ping IP address Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftpUsage of the phone Receiving calls Dial out the number from phone book Place a call with Fix IP Address