Perfectone Net Ware GW-200 manual

Page 19

GW-200 User Manual

Fig 3.6 Other Setting

password: Set the password of the phone. (Default password is 1234).

super password: Set the super password of the phone.(Default super password is 12345678).

debug: Set the debug level of the phone.

disable: Disable output the debug message by selecting this item.

output: Output the operation information to the window, such as register, input by selecting this item.

output all: Output all debug information and data in test window by selecting this item.

remote debug: Save the debug information in SDRAM of IP phone by selecting this item.

no check: Disable checking firmware tags when upgrading. This is not suggested, because it will increase the risk of upgrading the wrong firmware into the phone.

upgrade addr: Put IP address or domain name obtained by ISP of FTP server supplying upgrade program into this field.

nts ip: No needed to set for the Gateway(GW-200).

Image 19

Contents Page Page If you are not using Dhcp IP addressing If you are using Dhcp IP addressingBreif Introduction and how-to-start information Software HardwareElectric requirements Operating requirementsSize Installation Configure by Web browser Configuration Network SettingPage Protocol Setting Page System Page Phonesettings Page Beiing 10 Shanghai Audio settings Options are g729 g7231 g711u g711a and gsm Other settingsPage Page GW-200 V1.40 settings Password Telnet ConfigurationSet GW-200 Gateway Telnet Commands ExplanationCommand Function Detail description of GW-200 Telnet commands Command ?Detailed description Command getRelevant usage None Detailed description GW-200 V1.40 settings Detailed description Set iptype Command set Syntax description set keywords valueSet subnetmask Set pppidSet ppppin Set ipSet dns2 Set serviceSet service type Set dnsSet nataddr Set serviceaddrSet serviceid Set nattraversalSet account Set signalportSet natttl Set phonenumberSet jittersize Set registerttlSet rtptos Set rtpportSet dialnumber Set dtmfSet dtmf payload Set dialplanSet innerlinepreifx Set iddprefixSet dddprefix Set innerlineSet fwdnumber Set fwdpoweroffSet ringtype Set digitmapSet agc Set audioframesSet 6.3k Set vadSet codec2 Set passwordSet superpassword Set codec1Relevant Usage load Command exit Set upgradeaddrCommand store Relevant Usage store Command loadRelevant usage ftp Relevant usage None Command writeCommand ping Syntax description ping IP address Ftp command Syntax description ftp valueUsage of the phone Receiving calls Dial out the number from phone book Place a call with Fix IP Address