Perfectone Net Ware GW-200 Set registerttl, Set rtptos, Set rtpport, Set jittersize, Set calltype

Page 30

GW-200 User Manual

This port is H.245 port using TCP protocol. XXXX is range from 1024 through 65535.

set registerttl X

Set register TTL. X is range from 10 through 65535 Sec. default value is 60 Sec.

set rtptos X

Set TOS segment of IP head package in RTP digital follow.

set rtpport XXXX

RTP port is the port transferring and receiving voice flow using UDP protocol. XXXX is range from 1024 through 65535.

set jittersize X

Set buffer size of RTP package. X is range from 0-32.

set calltype X

Set call type of the phone. X is ranged from 0 through 2: 0: call out

in normal way; 1: call out in faststart and tunneling way. It is a recommended way.

set localtype X

This command used to set how gateway log in gatekeeper. X is ranged from 0 through 6: 0: use phone number as E.164 and ID to login the GK; 1: use phone number as E.164 and designated

ID by set account XXX command; 2:use support automated negotiate about MD5 or CAT authentication system.3:use MD5 authentication account and pin;4: use CAT authentication account

30

Image 30
Contents Page Page If you are using Dhcp IP addressing If you are not using Dhcp IP addressingBreif Introduction and how-to-start information Hardware SoftwareOperating requirements Electric requirementsSize Installation Configuration Configure by Web browserNetwork Setting   Page Protocol Setting Page System Page Phonesettings Page Beiing 10 Shanghai Audio settings Other settings Options are g729 g7231 g711u g711a and gsmPage Page Telnet Configuration GW-200 V1.40 settings PasswordDetail description of GW-200 Telnet commands Command ? GW-200 Gateway Telnet Commands ExplanationCommand Function SetCommand get Detailed descriptionRelevant usage None Detailed description GW-200 V1.40 settings Command set Syntax description set keywords value Detailed description Set iptypeSet ip Set pppidSet ppppin Set subnetmaskSet dns Set serviceSet service type Set dns2Set nattraversal Set serviceaddrSet serviceid Set nataddrSet phonenumber Set signalportSet natttl Set accountSet rtpport Set registerttlSet rtptos Set jittersizeSet dialplan Set dtmfSet dtmf payload Set dialnumberSet innerline Set iddprefixSet dddprefix Set innerlinepreifxSet digitmap Set fwdpoweroffSet ringtype Set fwdnumberSet vad Set audioframesSet 6.3k Set agcSet codec1 Set passwordSet superpassword Set codec2Relevant Usage store Command load Set upgradeaddrCommand store Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage None Command writeCommand ping Syntax description ping IP address Relevant usage ftpUsage of the phone Receiving calls Place a call with Fix IP Address Dial out the number from phone book