Perfectone Net Ware GW-200 manual Relevant usage None Command write, Relevant usage ftp

Page 37

GW-200 User Manual

Syntax description: no keyword and parameter

Usage: Exit from Telnet command window without saving the configuration.

Relevant usage: None

Command write

Syntax description: No keyword and parameter

Usage: Save the configuration and restart the GW-200 gateway.

Command ping

Syntax description: ping IP address

Usage: ping IP address of other NAT device

Relevant usage: In telnet window, input ping xx.xxx.xx.xx an IP

address

and return, then the result will be displayed. If the address is

effective,

ping OK will be seen; if the address is ineffective, nothing

will be seen. Fox example:

P:\>ping 203.93.9.57 P:\>

ping OK

P:\>ping 27.56.120.56 P:\>

Note Usually, the echo time of ping command is no more than 1 second. So if the

result is not displayed in 5 seconds, ping command is fail.

ftp command

Syntax description: ftp value

Usage: the system connects to the FTP server auto to get the corresponding file and deal with it.

Relevant usage: ftp X

X ranged from 0 through 2:

37

Image 37
Contents Page Page If you are not using Dhcp IP addressing If you are using Dhcp IP addressingBreif Introduction and how-to-start information Software HardwareElectric requirements Operating requirementsSize Installation Configure by Web browser Configuration   Network SettingPage Protocol Setting Page System Page Phonesettings Page Beiing 10 Shanghai Audio settings Options are g729 g7231 g711u g711a and gsm Other settingsPage Page GW-200 V1.40 settings Password Telnet ConfigurationCommand Function GW-200 Gateway Telnet Commands ExplanationDetail description of GW-200 Telnet commands Command ? SetDetailed description Command getRelevant usage None Detailed description GW-200 V1.40 settings Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet dns Set dns2Set serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet phonenumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dtmf payload Set dtmfSet dialplan Set dialnumberSet dddprefix Set iddprefixSet innerline Set innerlinepreifxSet ringtype Set fwdpoweroffSet digitmap Set fwdnumberSet 6.3k Set audioframesSet vad Set agcSet superpassword Set passwordSet codec1 Set codec2Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitCommand ping Syntax description ping IP address Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftpUsage of the phone Receiving calls Dial out the number from phone book Place a call with Fix IP Address