Perfectone Net Ware manual Telnet Configuration, GW-200 V1.40 settings Password

Page 21

GW-200 User Manual

typing the name into the Name field and then entering the corresponding number following the name. For example, input Jack in Name field following 001, and then input 5989426454 into Phone number field. Then Jack’s number 5989426454 is saved in phone book. Then please click Save/Back button. In normal state, you can use speed dial to call numbers saved in phone book.

Fig 3.8 Phone Book Illustration

Upgrade Program: Click this button to update the program of gateway. Before updating, please fill IP address of FTP server into upgrade addr field, and then click this button. Then the gateway will read the corresponding bin files from the server and then load into the gateway.

Update Digitmap: Click this button to update the digitmap of the gateway. Before updating, please fill IP address of FTP server into upgrade addr field, and then click this button. Then the gateway will read the corresponding map files from the server and then load into the gateway.

￿￿Telnet Configuration

￿On the PC choose Start>Run, and then type telnet 192.168.1.100 into Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the DOS window. Then the following information will be displayed.

GW-200 V1.40 settings

Password :

Then please type password. With debug is set as 0[disable], if type ordinary

password (default one is 1234), after Retun, you will see

Password : ****

21

Image 21
Contents Page Page If you are using Dhcp IP addressing If you are not using Dhcp IP addressingBreif Introduction and how-to-start information Software HardwareOperating requirements Electric requirementsSize Installation Configure by Web browser Configuration   Network SettingPage Protocol Setting Page System Page Phonesettings Page Beiing 10 Shanghai Audio settings Options are g729 g7231 g711u g711a and gsm Other settingsPage Page GW-200 V1.40 settings Password Telnet ConfigurationCommand Function GW-200 Gateway Telnet Commands ExplanationDetail description of GW-200 Telnet commands Command ? SetCommand get Detailed descriptionRelevant usage None Detailed description GW-200 V1.40 settings Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet dns Set dns2Set serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet phonenumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dtmf payload Set dtmfSet dialplan Set dialnumberSet dddprefix Set iddprefixSet innerline Set innerlinepreifxSet ringtype Set fwdpoweroffSet digitmap Set fwdnumberSet 6.3k Set audioframesSet vad Set agcSet superpassword Set passwordSet codec1 Set codec2Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitCommand ping Syntax description ping IP address Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftpUsage of the phone Receiving calls Dial out the number from phone book Place a call with Fix IP Address