PS Audio 1500 MKII manual Screws

®

Installation & Operating Instructions

Owner’s Reference PowerPack 1500 MKII

2.8Instructions for first time use

2.9Instructions for battery replacement

1.Remove the two screws from the vented door on the front panel. 2.Remove the vented door from the panel.

3.Remove the screws on left and right sides of battery drawer. 4.Slowly pull out the battery drawer.

5.Connect the black wire to the Negative (-) terminal of battery B (There may be a large spark when batter connections are made).

6.Slowly push the battery drawer into the UPS.

7.Replace and tighten the screws on left & right sides of battery drawer. 8.Replace the vented door.

9.Replace and tighten screws to secure the vented door.

1.Remove the two screws from the vented door on the front panel. 2.Remove the vented door from the front panel.

3.Remove the screws on left and right sides of battery drawer. 4.Pull out the battery drawer.

5.Connect batteries A & B in series by connect the Negative (-) terminal of battery A to the Positive (+) terminal of battery B with the included battery connecting cable.

6.Put the two batteries inside the battery drawer.

7.Connect the red wire to the Positive (+) terminal of Battery A. 8.Connect the black wire to the Negative (-) terminal of Battery B. (There may be a large spark when batter connections are made) 9.Slowly push the battery drawer into the UPS.

10.Replace and tighten the screws on left & right sides of battery drawer. 11.Replace the vented door

12.Replace and tighten crews to secure the vented door.

Battery A Battery B

+ - Battery drawer

Screws

4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 service@psaudio.com www.psaudio.com	Getting Started 20

©2009 PS Audio International Inc. All rights reserved.