PS Audio 1500 MKII Service, If you have problems Voltage changes, Your serial, Date of purchase

Page 25

®Service

Owner’s Reference PowerPack 1500 MKII

If you have problems

Voltage changes

worldwide. Service for PS Audio products outside the United States is handled through your country’s distributor or dealer.

1.Obtain a Return Authorization Number (R/A number) and shipping address from your dealer or distributor’s Service Department.

2.Insure and accept all liability for loss or damage to the product during shipment to the dealer or distributor’s Service Department and ensure all freight (shipping) charges are prepaid.

If you feel your country’s dealer or distributor is either unwilling or unable to service your PS Audio products, please contact our service department at service@psaudio.com or at the above contact numbers to discuss the situation.

Voltage changes to match your country’s voltage and frequency requirements to your PS Audio product are possible only through your dealer, your country’s authorized PS Audio distributor or the factory. Units purchased outside your country of residence will not be changed to

the appropriate voltage unless prior arrangements have been made at the time of purchase. Please refer any questions to your dealer or distributor or by contacting the PS Audio service department.

Your serial

Your PS Audio product serial number is:

number

 

 

 

Your purchase information

Please fill in the dealer or distributor’s information from where you originally purchased the unit.

Date of purchase

4826 Sterling Drive, Boulder, CO 80301

Service 25

PH: 720.406.8946 service@psaudio.com www.psaudio.com

 

©2009 PS Audio International Inc. All rights reserved.

Image 25
Contents Introduction Owner’s ReferenceTable Of Contents Introduction Important Safety InstructionsSystem Descriptions Features Box should include the following Unpacking & Inspection OverviewGetting Started 5V Rear Panel Charge the Battery InstallationVentilation Connect to ACConnect the Load Connect to PowerPlayOn Battery Mode AC ModeOperation and Functionality Test To conduct a simulation-test Manual Simulation of Power Outage for the UPSInstallation & Operating Instructions Setting Parameters Output ‘Frequency Setting Output ‘Frequency Setting Installation & Operating Instructions AVR Boost Range Setting Energy Saving mode Audible / Visual Indicators Operating Status Visual IndicatorsLED1 LED2 LED3 LED4 LED5 LED6 Abnormal Status Indicators Screws Interface with PowerPlay Interface with PowerPlayWarranty WarrantyConditions Remedy Miscellaneous Outside the US Service Service in NorthIf you require AmericaIf you have problems Voltage changes ServiceYour serial Number Your purchase informationTroubleshooting TroubleshootingTroubleshooting Troubleshooting Specifications subject to change without prior notice Specifications Specifications