Trango Broadband TrangoLink-10 user manual Off

Command Set Summary

Command	Description		OFF	ON	Remark
tftpd [<on off>]	enable or disable TFTPD service		se	se
tm	display current time mark		se	se
updateflash <mainimage	get image from TFTP buffer, verify		se	se
fpgaimage> <* current	checksum and write to flash memory at
chscksum> <* new checksum>	main or FPGA image section
	*: skip checksum verification
updateflash systemsetting	write current configuration into flash		se	se
	memory at system configuration section
ver	displays firmware version info:		se	se
	1.	version number and date code
	2.	firmware and FPGA version code
	3.	firmware and FPGA image
		checksum

Trango Broadband Wireless — TrangoLINK-10 User Manual Rev. E 3.0 page 28