Specifications
Appendix B Specifications
All specifications apply to
Radio Parameters | High Band (ISM) |
|
|
|
| 5725 MHz to 5850 |
|
|
|
Frequency of Operation | MHz |
|
|
|
| 6 |
|
|
|
| channels |
|
|
|
|
|
|
|
|
Antenna Gain | Internal Antenna | DSS Dish | 15" Patch | 36" Dish |
| 18 dBi ISM Band | 24 dBi | 24 dBi | 31 dBi |
Max Range / Fade Margin (5.8 Ghz ISM Band) | 10 Miles./ 10 dB | 20 Miles /15 dB | 20 Miles/15 dB | 40 Miles /21 dB |
Antenna Beamwidth (azimuth) | 18o | 9o | 9o | 4o |
Data Parameters |
|
Modulation Format | Direct Sequence Spread Spectrum (DSSS) with RAKE |
Certification/Compliance | FCC Part 15.247, 15.407 AP only: ETSI/EN301 |
Receiver Sensibility | |
User Data Throughput | 10 Mbps |
Format 10/100 BaseT | 10/100 BaseT |
Network Protocols | All IEEE 802.3 / 802.3u compliant protocols |
Configuration and Management | Telnet, SNMP, TFTP, HTTP, Serial |
Upstream/Downstream Throughput | Dynamic, automatically adjusts to suit demand |
Physical Interfaces |
|
Ethernet Speed (via RJ45 shielded) | 10/100 BaseT, |
Serial Speed | (via RJ11) 9600 baud |
Ethernet Packet | Up to 1600 byte long packets (supports VLAN/VPN pass through) |
POWER PARAMETERS |
|
Power Method | Power over Ethernet (PoE). DC Voltage injected at PoE |
Voltage input limits into PoE | 12 VDC - 24 VDC, 20 VDC Nominal |
Voltage input limits into Radio | 10.5 VDC - 21 VDC |
Standard Power Supply (included) | 120 VAC to 20 VDC |
PoE | 100 meters on 24 AWG STP |
Current Draw/Power | 670 mA max. (13.4 W), using 20V standard adapter |
Environmental |
|
Radio Enclosure | |
Temperature Range | |
NEMA Rating | NEMA 4 |
Radio Dimensions | 12.5 in. x 8 in. x 2.75 in. |
Radio Weight | 4 Lbs. |
User Interfaces | RJ45 (shielded) and RJ11 |
Trango Broadband Wireless — | page 29 |