Savin 4502P, 2335, 3502P Interrupting scanning, Scanning while copying, Scanning while printing

Page 27

AdonisC2-sysEN122F_FM.book Page 16 Thursday, February 1, 2001 1:46 PM

Combined Function Operations

1

16

Interrupting scanning

If you want to scan while copying or faxing, follow the procedure below.

Scanning while copying

Usually, you cannot use this machine as a scanner until it finishes copying.

Preparation

Select Function Reset Timer to set “Instant”. ⇒ P.34 “General Features

1/2

A Press {Clear/Stop} key.

Copying is interrupted.

B Remove the originals.

C Press {Reset} key.

D Start the scan.

Note

When the scan is completed, press {Copy} key and restart copying.

Scanning while scanning a fax message for memory transmission

Usually, you cannot use the scanner function until scanning a fax message for memory transmission is completed.

Preparation

Select Function Reset Timer to set “Instant”. ⇒ P.34 “General Features

1/2

A Press {Clear/Stop} key.

The fax message scan is interrupted.

Note

While using the quick memory delivery, previously scanned originals will be delivered.

B Remove the originals.

C Start the scan.

Note

When the scan is completed, press {Facsimile} key and restart faxing.

Scanning while doing an Immediate Fax Transmission

Usually, you cannot use the scanner function while it is doing an immedi- ate fax transmissions.

Preparation

Select Function Reset Timer to set “Instant”. ⇒ P.34 “General Features

1/2.

A Press {Clear/Stop} key.

The immediate fax transmission is interrupted.

Note

Previously scanned originals will be delivered.

B Remove the originals.

C Start the scan.

Note

When the scan is completed, press {Facsimile} key and restart faxing.

Scanning while printing

You can scan without interrupting printing.

Image 27
Contents Zdsh000j.eps Introduction Means Power ON. c means Stand by Expat Information about Installed SoftwareCopyrights and Trademarks TrademarksNetBSD Authors Name List Energy Star Program Recycled Paper SpecificationLimitation How to Read this ManualSymbols PreparationTable of Contents Accessing the User Tools System Settings User Tools System SettingsManuals for this Machine Machine Types Scanner Mode Option Copy ModeFacsimile Mode Option Printer Mode OptionPage Control Panel Function Status indicator Changing Modes Copy Mode Changing to Copy ModeInterrupt copying to make urgently needed copies Copying and Multi-accessing When Print Priority = Inter- leaveWhen Print Priority = Fax, Printer, or Display default Document Server Mode Copying by Using Document ServerStoring Documents onto the Document Server Storing Documents from Printer Interrupt the Operating Function and Start StoringWhile Copying Printing a Received Fax Facsimile ModeChanging to Facsimile Mode When Print Priority = Interleave Sending a fax while copying Press the Facsimile key to switch to the facsimile display Sending a Fax Sending a fax while printing a received faxPress the Printer key Printer ModeChanging to Printer Mode PrintingUsing the Network Delivery Scanner Scanner ModeChanging to Scanner Mode Using the Network Twain ScannerScanning while printing Interrupting scanningScanning while copying Scanning while doing an Immediate Fax TransmissionSample operations Multi-AccessMode after you select Facsimile Printer DeskTopBinder Simultaneous stapling is not available Combined Function Operations Configuring the Network Configuring the NetworkConfiguring the Network with Operation Panel Press User Tools/CounterUser Tools Main Menu appears Press Effective Protocol Press System Settings Press Interface SettingsFollowing screen appears on the panel display Make sure that the Network key is pressedUse the number keys to enter the IP address Press IP AddressIf you use the Dhcp server, press Network Boot Press Network BootPress DHCP, and then press OK Press NW Frame Type Press TNext, and then press NW Frame Type if you use NetWarePress User Tools/Counter key Press List/Test Print to print out the settingsPress Printer Features Press List/Test Print Press Config. Select the Frame Type, and then press OK Press ExitConfiguring the Network Press the User Tools/Counter key Accessing the User Tools System SettingsPress the System Settings key System Settings menu appearsExiting from the User Tools Accessing the User Tools System Settings User Tools Menu System Settings User Tools Menu System Settings General Features 1/2 Settings You Can Change with the User ToolsFunction Reset Timer Output Copier Output Document ServerYou can specify a tray to which documents are delivered Prepare Stapling General Features 2/2Output Facsimile Output PrinterPaper Tray Priority Fax/Printer Paper Size Settings 1/3Output tray settings Paper Tray Priority Copy/Document ServerPaper Size Settings 2/3 Paper Type Bypass TrayPaper Type Tray1-4 Slip Sheet Tray Copy/Document Server Paper Size Settings 3/3Paper Type LCT Cover Sheet Tray Copy/Document ServerSystem Reset Timer Timer SettingAuto Off Timer Panel Off TimerSet Time Facsimile Auto Reset TimerScanner Auto Reset Timer Set DateSub-net Mask Interface Settings/Network 1/2-2/2Access Control and Access Mask IP AddressEthernet Speed Network BootEffective Protocol NW Frame TypeInterface Settings/Parallel Interface File Transfer Delivery Server IP AddressFax RX File Transmission User Code Management Key Operator Tools 1/2Recall Interval Time Number of RecallsKey Operator Code AOF Always onProgram/Change/Delete User Code User Code Display/Print CounterDisplay/Clear/Print Counter per User Code Change User Name OrderDocument Server FacsimilePrinter Press New Program key You can only select one page for Title SelectEnter the user code 8 digits max, then press the # key Functions that can selected are as follows Copier, Facsimile TX, Printer, Document Server, ScannerPress Enter Name, then enter the name for the user code Display returns to the initial settings screen Changing the User CodePress the OK key Press the Exit key Display returns to the initial settings screen Press the Delete key Select the user code you want to delete Clearing the User CodePress the User Tools/ Counter key To delete all user codesPress the OK key Press Yes in the confirmation screen If you dont want to quit deleting, press NoIf you dont want to quit deleting, press No To display counter for each user code Printing the Counter Select User Code from the left side of displayPress Print All Codes of Per User Code Press Print Press Print All Codes of All User CodeIf User Code Management is set to ON, input the enter codes Clearing the Counter Press Clear for Per User Code Press Clear for All User Codes Press OK Delete All Files Display Password with Stored FileKey Operator Tools 2/2 Auto Delete FileEntering Text Available CharactersKeys Press Backspace or Delete All to delete characters How to Enter TextEntering letters Deleting charactersIndex