Settings You Can Change with the User Tools
❖Recall Interval Time
Specifies the interval the machine waits before resending data or a document, if a data could not be sent to the ScanRouter V2 Professional.
Note
❒Default: 300 Seconds
❒Enter an interval within the range of “60
❒This setting is for the Scanner function. The distribution of received fax documents will still be performed.
|
|
❖ Number of Recalls | 3 |
Note
❒Default: Yes
❒Enter a number of times within the range of
❒The default setting is 3 times.
❒This setting is for the Scanner function. The distribution of received fax documents will still be performed.
Key Operator Tools 1/2
If an access code has been set, you cannot use the Key Operator Tools unless you enter the access code (max. 8 digits). ⇒ P.48 “Key Operator Code”
Reference
For details about user codes, ⇒ P.49 “User Code”
❖User Code Management
Allows you to control who uses the machine by setting user codes for users.
Note
❒Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF, Printer/OFF
❒By using “Auto Registration” for the printer you can keep a print log for each user code entered from the driver.
❖Key Counter Management
Use the key counter to specify whether users are limited or not.
Note
❒Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF, Printer/OFF
47