Savin 3502P, 2335 Changing to Copy Mode, Interrupt copying to make urgently needed copies

AdonisC2-sysEN122F_FM.book Page 8 Thursday, February 1, 2001 1:46 PM

Combined Function Operations

1

8

Copy Mode

You can make basic copies, and en- large/reduce, combine, or use vari- ous other copy functions to make copies. You can also add options to further increase the number of func- tions. For more details, refer to "Op- tions" in the Copy Reference manual.

Changing to Copy Mode

You can always make a copy when the machine isn't printing or scanning a fax data.

A Press the {Copy} key.

The copier display appears on the panel display.

Reference

For details, see the “Copy Refer- ence”.

Interrupt copying to make urgently needed copies

You can interrupt the current job to make a copy.

Preparation

Machine operations are different depending on the settings “Print Priority”(⇒ P.34 “General Features 1/2”) or “User Code Management” (⇒ P.47 “Key Operator Tools 1/2”) settings.

Limitation

❒You cannot use the interrupt copy function in the following cases:

•during fax immediate transmis- sion

•while scanning an original for memory transmission

•during interrupt copying

A Press the {Interrupt} key.

If the machine is scanning origi- nals, it will immediately stop the scanning job. On the other hand, if the machine is performing a copy or print job, it will still continue the job until you press the {Start} key after pressing the {Interrupt} key. When the current job stops, the in- terrupt copy display appears on the panel display.

Note

❒When you interrupt a copying job, remove the previous origi- nal.

B Make your copies.

Important

❒If the remaining memory space is 0%, the machine fails to re- ceive fax data. Wait until the machine completes printing a received fax, then start making copies.

Note

❒While copying, a received fax doc- ument is stored in memory and the Receive File indicator is lit.

C After interrupt copying is com- pleted, remove the original and delivered copies.