Uniden UBC220XLT manual Ch L DC Due

Page 20

---

. !

Locking Out Chan nels

You may have programmed certain channels that you do not

want to hear every time you scan. These are channels that are busy a major portion of the time, and the scanner stops at the channel(s) often enough to interrupt the scan cycle. You can lock Out those channels so they are not scanned.

1.Go directly to that channel using any of the methods described above.

2.Press @. UQ appears at the lower right of the display.

That channel is now "locked Out" of the scanning cycle.

However, you can access that channel at any time using one of the Direct Channel Access methods.

To put the channel back In the scanning cycle:

1.Go directly to the desired channel.

2.Press @. The UQ indicator now disappears from the display, and the channel is no longer "locked Out".

You can lock out any or all of the Priority Channels the same way as other channels. If you lock out all Priority Channels

and you press C~) yoll will see this message.

BANK 1

p ch L DC Due

HOLD UO

If you want to put all the "locked-Out' channels of

an active bank back to the scanning cycle, press @

to put scanning on HOLD. Then press and hold @ key for about two seconds until you hear two beeps. All channels are now returned to scanning cycle except those that are empty (000. 000 MHz).

Looking for "Locked Out" Channels

During scanning, you will not see "locked Out" channels. To

look for "locked Out" channels, first press ~ to stop

scanning. Then use £ or. to step through the Bank. You will see UQ" on the display to indicate a "locked Out" channel.

18

Image 20
Contents UBC 220XL T Precautions Before you use this scanner, please read and observeTable of Contents About Your New UBC 220XLT Types of Communication BeltClip UnpackingFeature Highlights Priority Channels You can assign one PriorityControl Controls and IndicatorsVolume Control Indicates Scan Mode When in Turbo Search ModePAl Indicates Priority Scan Mode Weather Scan ModeWhile Scanning, press @ Scan Mode. PR~ears On the display. WhileAir Band Key Bank Channel D1 1 CD 2 21~ars Setu p ~ ~ Insert the 2 screws into the corresponding holes Installing the Belt ClipUsing the Earphone Operation Overview ~ SC RN Bank 1 2 3 4 5 6 7 8 918/125.25 To program another channel, repeat the above procedures Deleting a Stored FrequencyLook at the lower left corner of the display. If SCNis not ScanningPress @ To activate Priority Scan, press @. The PRI indicator willPriority Scan Ch L DC Due Weather Channel Scanning Searching Press DAT~to activate the Data Skip feature. The DIc1JDIc1A indicator disappears from the display ~iY~BD6.DDDD Care and Maintenance Replacing the Battery PackLocation Birdies Proper Care of Your ScannerTrou bleshooti n9 Optional Accessories Replacement Parts Technical Specifications Channels BanksUnidl!n@