Uniden UBC220XLT manual Key Bank Channel D1 1 CD 2 21, ~ars, Air Band

Page 11

11.NUMERIC KEVPAD - Use these keys to program a channel for scanning. Also use to access a channel

directly with~. During SCAN Mode, use these keys to select or deselect any of the 10 memory banks. (Only

the selected bank indicator(s) appear on the display.) Note: You cannot deactivate al/10 banks at the

same time.

Key Bank Channel

(D1 1 - 20

CD 2 21 - 40

CD 3 41 - 60

CD 4 61- 80

CD 5 81 - 100

CD 6 101 - 120

CD 7 121 - 140

CD 8 141 - 160

CD 9 161 -180

CD 10 181 - 200

I

12.PressCD to store a displayedor enteredfrequency into any displayedchannel.

13.Press ISRCHIto start a search within frequency limits specified by you.

14.In SEARCH Mode, press (HOlD)to stop searching.

When Search is stopped,use" to go up in frequency. In SCAN HOLD Mode,use this keyto go upto

the nextchannel.

15.Press @ to "Lock Out" or prevent scanning of the displayed channel, including Priority Channels. (UO

~ars

on the display.) To unlock a channel, press

U:!QJ again. @ can be used in Scan or SEARCH Modes.

16.Use (DAT~to skip data signals and unmodulatedcarriers when in SEARCH Mode. This feature is not active in the

Air Band.

9

Image 11
Contents UBC 220XL T Before you use this scanner, please read and observe PrecautionsTable of Contents About Your New UBC 220XLT Types of Communication Unpacking BeltClipPriority Channels You can assign one Priority Feature HighlightsControl Controls and IndicatorsVolume Control Weather Scan Mode Indicates Scan ModeWhen in Turbo Search Mode PAl Indicates Priority Scan ModeScan Mode. PR~ears On the display. While While Scanning, press @Air Band Key Bank Channel D1 1 CD 2 21~ars Setu p ~ ~ Insert the 2 screws into the corresponding holes Installing the Belt ClipUsing the Earphone Operation Overview Bank 1 2 3 4 5 6 7 8 9 ~ SC RN18/125.25 Deleting a Stored Frequency To program another channel, repeat the above proceduresScanning Look at the lower left corner of the display. If SCNis notPress @ To activate Priority Scan, press @. The PRI indicator willPriority Scan Ch L DC Due Weather Channel Scanning Searching Press DAT~to activate the Data Skip feature. The DIc1JDIc1A indicator disappears from the display ~iY~BD6.DDDD Replacing the Battery Pack Care and MaintenanceLocation Proper Care of Your Scanner BirdiesTrou bleshooti n9 Optional Accessories Replacement Parts Channels Banks Technical SpecificationsUnidl!n@