Uniden UBC220XLT manual Technical Specifications, Channels Banks

Page 29

Technical Specifications

Channels:

Banks:

200

Total 10 Banks

20 Channels each

WX:

7 Programmed Channels

Frequency Coverage

66.60to 88.00 MHz (NFM)

108.00to 136.9875 MHz (AM)

137.00to 144.00 MHz (NFM)

144.00to 148.00 MHz (NFM)

148.00to 174.00 MHz (NFM)

406.00to 420.00 MHz (NFM)

420.00to 450.00 MHz (NFM)

450.00to 470.00 MHz (NFM)

470.00to 512.00 MHz (NFM)

806.00to 824.00 MHz (NFM)

824.01to 848.97 MHz (NFM) 848.9875 to 869.00 MHz (NFM)

869.01to 893.97 MHz (NFM) 893.9875 to 956.0 MHz (NFM)

Steps

5kHz

12.5kHz

5kHz

5kHz

5kHZ

12.5kHz

12.5kHz

12.5kHz

12.5kHz

12.5kHz

30.0kHz*

12.5kHz

30.0kHz*

12.5kHz

* AMPS Cellular Transmit and Receive Frequency.

Scan Rate: Search Rate:

Scan Delay: Audio Output:

Antenna:

Operating

Temperafure:

Size:

Weight:

Power

Requirements:

100 channels per sec. Max.

100 steps per sec. ~ormal SEARCH Mode)

300 steps per sec. (TURBO SEARCH Mode)

2 seconds

180 mW nominal into 8il internal speaker

30 mW nominal into 32il stereo headphones I

8 mW nominal into 64Q supplied earphone Rubber antenna included

-20°C to +60°C

63mm (W) x 44mm (D) x 311 mm (H) (with antenna attached)

0.36 kg.

4.8V DC (Internal Battery or AC Adaptor! Charger)

Features, specifications, and availability of optional accessories are all subject to change without notice.

27

Image 29
Contents UBC 220XL T Before you use this scanner, please read and observe PrecautionsTable of Contents About Your New UBC 220XLT Types of Communication Unpacking BeltClipPriority Channels You can assign one Priority Feature HighlightsControl Controls and IndicatorsVolume Control When in Turbo Search Mode Indicates Scan ModePAl Indicates Priority Scan Mode Weather Scan ModeScan Mode. PR~ears On the display. While While Scanning, press @Air Band Key Bank Channel D1 1 CD 2 21~ars Setu p ~ ~ Insert the 2 screws into the corresponding holes Installing the Belt ClipUsing the Earphone Operation Overview Bank 1 2 3 4 5 6 7 8 9 ~ SC RN18/125.25 Deleting a Stored Frequency To program another channel, repeat the above proceduresScanning Look at the lower left corner of the display. If SCNis notPress @ To activate Priority Scan, press @. The PRI indicator willPriority Scan Ch L DC Due Weather Channel Scanning Searching Press DAT~to activate the Data Skip feature. The DIc1JDIc1A indicator disappears from the display ~iY~BD6.DDDD Replacing the Battery Pack Care and MaintenanceLocation Proper Care of Your Scanner BirdiesTrou bleshooti n9 Optional Accessories Replacement Parts Channels Banks Technical SpecificationsUnidl!n@