Uniden UBC220XLT manual Datj Indicates Data Skip activated during Search, Indicates Scan Mode

Page 9

Front View

(Refer to the foldout ill ustration inside the Back Cover)

Complete explanations of the use of these keys are in the

 

Scanning section, page 16, and Searching

section,

page20.

 

1. LCD DISPLAY - The liquid crystal

display

(LCD)

 

shows the current channel

and frequency. It also

I

displays the mode, status,

and bank

indicators.

A.Scan Type Indicator - Indicates BANK Scan operation.

B.Channel Number - Indicatesthe current channel that the scanner is on.

C.Memory Bank Numbers - Each Memory Bank consists of 20 channels that you can select or deselect during scanning operation, using the numeric keypad. When you select a Bank, its number appears on the display. When

you deselect a Bank, its number di~pears from the display. When you press ~to stop scanning, only the Bank of the current channel appears.

D.Low Battery Indicator - Appears on the display when the Battery Pack is Iow and needs recharging.

E.Frequency Indicator - 7 -digits plus decimal

indicate the frequency being received by the scanner.

F.Mode Indicators - (Only the active mode(s) are displayed during operation)

DATJ( Indicates DATA SKIP activated during SEARCH.

SCN

Indicates SCAN Mode.

SACH

Indicates SEARCH Mode. Flashes

 

when in TURBO SEARCH Mode.

PAl

Indicates PRIORITY SCAN Mode.

HOLD

IndicatesSCAN HOLD, or SEARCH

 

HOLD.

 

DLY

Indicates

DELAY is activated.

UO

Indicates the channel shown is

 

"Locked

Out".

wx

Indicates

WEATHER SCAN Mode.

7

Image 9
Contents UBC 220XL T Before you use this scanner, please read and observe PrecautionsTable of Contents About Your New UBC 220XLT Types of Communication Unpacking BeltClipPriority Channels You can assign one Priority Feature HighlightsControls and Indicators Volume ControlControl When in Turbo Search Mode Indicates Scan ModePAl Indicates Priority Scan Mode Weather Scan ModeScan Mode. PR~ears On the display. While While Scanning, press @Key Bank Channel D1 1 CD 2 21 ~arsAir Band Setu p Installing the Belt Clip Using the Earphone~ ~ Insert the 2 screws into the corresponding holes Operation Overview Bank 1 2 3 4 5 6 7 8 9 ~ SC RN18/125.25 Deleting a Stored Frequency To program another channel, repeat the above proceduresScanning Look at the lower left corner of the display. If SCNis notTo activate Priority Scan, press @. The PRI indicator will Priority ScanPress @ Ch L DC Due Weather Channel Scanning Press DAT~to activate the Data Skip feature. The DIc1J DIc1A indicator disappears from the displaySearching ~iY~BD6.DDDD Replacing the Battery Pack Care and MaintenanceLocation Proper Care of Your Scanner BirdiesTrou bleshooti n9 Optional Accessories Replacement Parts Channels Banks Technical SpecificationsUnidl!n@