Uniden UBC220XLT manual Care and Maintenance, Replacing the Battery Pack

Page 24

Care and Maintenance

Replacing the Battery Pack

1. Turn the On-OffNolume Control OFF.

2. Turn the scanner over

so you are looking at

the back.

@(@0 @)@

~

3.Press in on the ribbed area and slide the

Battery Cover down	(@@1
and off.	@C0@
and off.

~..

4.Carefully unplug the Battery Back and lift it out of the case.

5.Carefully plug in the new Battery Pack, observing the proper polarity. (The RED wire should be on the right as you plug it in.) Although the plug is keyed to reduce the chance of inserting it wrong, make sure the wires are in the correct position before pushing it in all the way. DO NOT FORCE THE PLUG IN.

\1

\

\

!

22

Image 24

Contents UBC 220XL T Precautions Before you use this scanner, please read and observeTable of Contents About Your New UBC 220XLT Types of Communication BeltClip UnpackingFeature Highlights Priority Channels You can assign one PriorityControls and Indicators Volume ControlControl Indicates Scan Mode When in Turbo Search ModePAl Indicates Priority Scan Mode Weather Scan ModeWhile Scanning, press @ Scan Mode. PR~ears On the display. WhileKey Bank Channel D1 1 CD 2 21 ~arsAir Band Setu p Installing the Belt Clip Using the Earphone~ ~ Insert the 2 screws into the corresponding holes Operation Overview ~ SC RN Bank 1 2 3 4 5 6 7 8 918/125.25 To program another channel, repeat the above procedures Deleting a Stored FrequencyLook at the lower left corner of the display. If SCNis not ScanningTo activate Priority Scan, press @. The PRI indicator will Priority ScanPress @ Ch L DC Due Weather Channel Scanning Press DAT~to activate the Data Skip feature. The DIc1J DIc1A indicator disappears from the displaySearching ~iY~BD6.DDDD Care and Maintenance Replacing the Battery PackLocation Birdies Proper Care of Your ScannerTrou bleshooti n9 Optional Accessories Replacement Parts Technical Specifications Channels BanksUnidl!n@