Uniden UBC220XLT manual Deleting a Stored Frequency

Page 17

6.Press CD to store the entry. The channel number on the display stops blinking.

BANK 2

18125.2500

AIR

HOLD

7.If that frequency is already stored in another channel, you will hear a "beep", and the duplicate channel number will appear on the display.

If you want to store the frequency in the selected channel (18) as well, press CD again. Or, press CV and enter another frequency for the currently selected channel. The channel number on the display stops blinking.

Note: Any frequency already stored in any channel will automatically be replaced by the new one.

8.If you try to enter a frequency that is outside one of the 10 Bands, you will hear a "beep", and the word "Error" appears on the display.

BANK 2

18Error

HOLD

Press 0 and re-enter the correct frequency.

9.To program another channel, repeat the above procedures.

Deleting a Stored Frequency

To delete a frequency from a channel:

1.Display the channel and frequency to be deleted.

2.Press CD on the numeric keypad.

3.Press CD. The current channel is erased, and the display shows 000.000.

Note: That channel will be skipped during scanning.

15

Image 17

Contents UBC 220XL T Before you use this scanner, please read and observe PrecautionsTable of Contents About Your New UBC 220XLT Types of Communication Unpacking BeltClipPriority Channels You can assign one Priority Feature HighlightsControl Controls and IndicatorsVolume Control When in Turbo Search Mode Indicates Scan ModePAl Indicates Priority Scan Mode Weather Scan ModeScan Mode. PR~ears On the display. While While Scanning, press @Air Band Key Bank Channel D1 1 CD 2 21~ars Setu p ~ ~ Insert the 2 screws into the corresponding holes Installing the Belt ClipUsing the Earphone Operation Overview Bank 1 2 3 4 5 6 7 8 9 ~ SC RN18/125.25 Deleting a Stored Frequency To program another channel, repeat the above proceduresScanning Look at the lower left corner of the display. If SCNis notPress @ To activate Priority Scan, press @. The PRI indicator willPriority Scan Ch L DC Due Weather Channel Scanning Searching Press DAT~to activate the Data Skip feature. The DIc1JDIc1A indicator disappears from the display ~iY~BD6.DDDD Replacing the Battery Pack Care and MaintenanceLocation Proper Care of Your Scanner BirdiesTrou bleshooti n9 Optional Accessories Replacement Parts Channels Banks Technical SpecificationsUnidl!n@