Uniden UBC220XLT manual Controls and Indicators, Volume Control

Page 8

Controls and Indicators

Antenna

Connector

Earphone Jack

SQUELCH

Control

ON-OFF!

VOLUME Control

Top View

Connect the rubber antenna to this BNC connector and turn clockwise until it locks.

Plug the supplied earphone into this jack for

private listening. When the earphone is

connected, the internal speaker is disconnected.

Note the warning on the Inside Front Cover

 

and on page 11 .

-

Adjust this control to set the scan threshold

 

and to eliminate the background rushing

 

noise heard in the absence of an incoming

 

signal. See the Operation Section for

 

adjustment procedure.

 

Use this control to turn the scanner on or off, and to adjust the volume.

6

Image 8
Contents UBC 220XL T Precautions Before you use this scanner, please read and observeTable of Contents About Your New UBC 220XLT Types of Communication BeltClip UnpackingFeature Highlights Priority Channels You can assign one PriorityControl Controls and IndicatorsVolume Control Indicates Scan Mode When in Turbo Search ModePAl Indicates Priority Scan Mode Weather Scan ModeWhile Scanning, press @ Scan Mode. PR~ears On the display. WhileAir Band Key Bank Channel D1 1 CD 2 21~ars Setu p ~ ~ Insert the 2 screws into the corresponding holes Installing the Belt ClipUsing the Earphone Operation Overview ~ SC RN Bank 1 2 3 4 5 6 7 8 918/125.25 To program another channel, repeat the above procedures Deleting a Stored FrequencyLook at the lower left corner of the display. If SCNis not ScanningPress @ To activate Priority Scan, press @. The PRI indicator willPriority Scan Ch L DC Due Weather Channel Scanning Searching Press DAT~to activate the Data Skip feature. The DIc1JDIc1A indicator disappears from the display ~iY~BD6.DDDD Care and Maintenance Replacing the Battery PackLocation Birdies Proper Care of Your ScannerTrou bleshooti n9 Optional Accessories Replacement Parts Technical Specifications Channels BanksUnidl!n@