Uniden UBC220XLT manual Installing the Belt Clip, Using the Earphone

Page 13

Installing the Belt Clip

1.Place the Belt Clip on the mounting area on the back of the

scanner, making sure the holes in the clip Iine up with the threads in the back of the scanner.

~ ~

@@

~

n

2.Insert the 2 screws into the corresponding holes and

tighten.~

CAUTION: Do not tighten the screws too tight. You could damage the case or clip.

Using the Earphone

The PHONE jack at the top of the UBC 220XL T is a standard 3.5mm stereo phone jack. You can use either the supplied earphone, or a stereo headset of the proper impedance (32Q). The output of this jack is monaural audio, but you will hear it in both headphones of a stereo headset.

IMPORT ANT!

Be sure to use only the supplied earphone, or stereo headset of the proper impedance (32Q). Use of an incorrect earphone or stereo headset may be potentially hazardous to your hearing.

WARNING:To avoid discomfort or possible hear- ing damage, be sure to set the Volume Control

before plugging in the earphone or proper head- phones. A sudden opening of the Squelch may cause unexpected loud audio.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents UBC 220XL T Before you use this scanner, please read and observe PrecautionsTable of Contents About Your New UBC 220XLT Types of Communication Unpacking BeltClipPriority Channels You can assign one Priority Feature HighlightsVolume Control Controls and IndicatorsControl When in Turbo Search Mode Indicates Scan ModePAl Indicates Priority Scan Mode Weather Scan Mode Scan Mode. PR~ears On the display. While While Scanning, press @~ars Key Bank Channel D1 1 CD 2 21Air Band Setu p Using the Earphone Installing the Belt Clip~ ~ Insert the 2 screws into the corresponding holes Operation Overview Bank 1 2 3 4 5 6 7 8 9 ~ SC RN18/125.25 Deleting a Stored Frequency To program another channel, repeat the above proceduresScanning Look at the lower left corner of the display. If SCNis notPriority Scan To activate Priority Scan, press @. The PRI indicator willPress @ Ch L DC Due Weather Channel Scanning DIc1A indicator disappears from the display Press DAT~to activate the Data Skip feature. The DIc1JSearching ~iY~BD6.DDDD Replacing the Battery Pack Care and MaintenanceLocation Proper Care of Your Scanner BirdiesTrou bleshooti n9 Optional Accessories Replacement Parts Channels Banks Technical SpecificationsUnidl!n@
Top Page Image Contents