Uniden manual Snap the windshield mounting clip onto the BCT-10

Page 10

Installation

4. Snap the windshield mounting clip onto the BCT-10.

VOLUME

OFF

Slots

5. Slide the plastic windshield mounting clip into the the metal mounting bracket.

HIGHWAY

SYSTEM

ALARM MUTE MODE

HOLD

STATE

L/0

The mounting clip locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical angles of their windshields. The back position can be used for vehicles with windshields that are slanted back.

10

Image 10
Contents Introduction FeaturesWelcome Mobile Extender Terms and DefinitionsFrequency ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsBCT-10 Antenna Installing the AntennaFlexible Mobile Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers