Uniden BCT-10 manual Unit and the visor mount off and on the visor

Page 8

Installation

2. Slide the clip over the front of the visor.

SQUELCH

3.Adjust the angle of the antenna as close to straight up or down as possible.

SQUELCH

Note: You can remove and replace the BCT-10 by sliding both

the unit and the visor mount off and on the visor.

8

Image 8

Contents Welcome FeaturesIntroduction Terms and Definitions FrequencyMobile Extender ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsFlexible Mobile Antenna Installing the AntennaBCT-10 Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers