Uniden BCT-10 manual Connecting the Power, Direct Connection

Page 12

Connecting the Power

Direct Connection

WARNING: The BCT-10 is designed to operate only with 12V DC, negative ground power systems. Operation of the unit on other voltages or polarities will cause damage to the unit and may create a fire hazard.

The straight power cord provided with the unit has bare wires at one end, and a small connector at the other end.

1.Connect the positive wire to a 12V DC source in your vehicle’s fuse box.

2.Connect the other wire to ground.

OFF

HIGHWAY

SYSTEM

 

MODE

 

MUTE

ALARM

L/0

HOLD

STATE

 

Fuse

Box

12

Image 12
Contents Features IntroductionWelcome Terms and Definitions FrequencyMobile Extender ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsInstalling the Antenna BCT-10 AntennaFlexible Mobile Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers