Uniden BCT-10 manual Using the Cigarette Lighter Adapter, Connecting the Power

Page 13

Connecting the Power

3. Run the power cord from the fuse box to the BCT-10.

Note: Ensure the cord does not interfere with vehicle operation or cause a tripping hazard.

4.Plug the power cord connector into the Control Unit at the jack labeled “DC 12V.”

Note: Push the connector firmly into the jack.

Using the Cigarette Lighter Adapter

1. Insert the small connector into the jack on the side of the unit.

OFF

HIGHWAY

SYSTEM

	MODE
	MUTE
ALARM	L/0
HOLD	STATE
HOLD

2.Insert the other end into the cigarette lighter socket of your vehicle.

13

Image 13

Contents Introduction FeaturesWelcome Frequency Terms and DefinitionsMobile Extender ScanningUnpacking Included with Your BCT-10 Scanner Helpful Tips InstallationBCT-10 Antenna Installing the AntennaFlexible Mobile Antenna Visor Mounting Mounting the BCT-10Unit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Direct Connection Connecting the PowerConnecting the Power Using the Cigarette Lighter AdapterReplacing the Fuse Operating Instructions Applying PowerStrong Signals Medium Signals Weak Signals Noise Adjusting the SquelchOperating Instructions Selecting the State Code State State CodesScanning All Frequencies Selecting the Frequencies to ScanScanning Highway Patrol Frequencies Scanning All Police Frequencies Setting the Highway Patrol Alarm Range Highway Patrol AlarmSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Birdies Memory BackupTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers