Uniden BCT-10 manual Adjusting the Squelch, Strong Signals Medium Signals Weak Signals Noise

Page 16

Operating Instructions

Adjusting the Squelch

Think of the Squelch Control as a gate.

1.Turn the SQUELCH control fully counterclockwise. This raises the “Squelch Gate” so high that no signals can get through.

Strong Signals

Medium Signals

Weak Signals

Noise

2.Turn the SQUELCH control fully clockwise until you hear a hiss. This lowers the “Squelch Gate” so that everything gets through ... noise, weak signals, and strong signals.

Strong Signals

Medium Signals

Weak Signals

Noise

16

Image 16

Contents Introduction FeaturesWelcome Terms and Definitions FrequencyMobile Extender ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsBCT-10 Antenna Installing the AntennaFlexible Mobile Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers