Uniden BCT-10 manual Setting the Highway Patrol Alarm Volume

Page 24

Operating Instructions

2.The LR and SR LED’s toggle and you hear two short beeps once either standard or long range mode is selected.

MUTE

HOLD HP

Setting the Highway Patrol Alarm Volume

You can set the Alert Tone volume to either Low, Medium, or High. To change the Alert Tone volume:

1. Press the A Key.

HIGHWAY

SYSTEM

ALARMMODE

MUTE

HOLD	STATE	L/0

2.You hear a beep and the LED will display L (low), M (medium), or H (high).

MUTE

HOLD L

MUTE

HOLD M

MUTE

HOLD H

24

Image 24

Contents Features IntroductionWelcome Terms and Definitions FrequencyMobile Extender ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsInstalling the Antenna BCT-10 AntennaFlexible Mobile Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers