Uniden BCT-10 manual Operating Instructions, Applying Power

Page 15

Operating Instructions

Applying Power

1.Turn the OFF/VOLUME control counter clockwise to power on the scanner. Adjust the volume about 1/4 turn.

2.During power-on, a self-test is performed. Check the front control panel for proper operation.

3.All the LED’s on the front control panel light up and the numbers 1 through 9 count up on the LED display. An Alert tone is also sounded. This tells you that the scanner is working properly.

4.The currently selected state appears on the display. The BCT-10 always comes on with the last settings selected, and in the last mode of operation.

MUTE	SR	HP
DISPLAY	WX	LP

MUTE

HOLD 9

MUTE

HOLD TX

15

Image 15

Contents Features IntroductionWelcome Scanning Terms and DefinitionsFrequency Mobile ExtenderUnpacking Included with Your BCT-10 Scanner Helpful Tips InstallationInstalling the Antenna BCT-10 AntennaFlexible Mobile Antenna Visor Mounting Mounting the BCT-10Unit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Direct Connection Connecting the PowerConnecting the Power Using the Cigarette Lighter AdapterReplacing the Fuse Operating Instructions Applying PowerStrong Signals Medium Signals Weak Signals Noise Adjusting the SquelchOperating Instructions Selecting the State Code State State CodesScanning All Frequencies Selecting the Frequencies to ScanScanning Highway Patrol Frequencies Scanning All Police Frequencies Setting the Highway Patrol Alarm Range Highway Patrol AlarmSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Birdies Memory BackupTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers