Uniden BCT-10 manual You hear a two beeps and the Mute LED comes on

Page 26

Operating Instructions

To disable the alarm tone permanently:

1.Press and Hold the m key for two seconds.

HIGHWAY

SYSTEM

ALARM MUTE MODE

HOLD	STATE	L/0
	STATE

2.You hear a two beeps and the MUTE LED comes on.

MUTE

HOLD HP

Note: When the MUTE LED is on and not flashing, you can receive highway patrol alarms, but the alarm tone does not sound.

26

Image 26

Contents Welcome FeaturesIntroduction Mobile Extender Terms and DefinitionsFrequency ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsFlexible Mobile Antenna Installing the AntennaBCT-10 Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers