Operating Instructions
Using HOLD to Stay on a Selected Frequency
When scanning stops on a desired frequency, you can lock onto that frequency for as long as you like.
To monitor only one frequency:
1.When the scanner stops on the desired frequency, press the H key.
SYSTEM
ALARM MUTE MODE
HOLD | STATE | L/0 |
2.The LED display now indicates the service, either highway patrol or local police, you are monitoring. The scanner remains on that frequency until you cancel the Hold mode by pressing H
MUTE
HOLD LP
MUTE
HOLD HP
Note: While in the Hold mode, the Alarm feature is inactive!
3.To resume scanning and reactivate the Alert feature, press the
H key.
30