Uniden manual Installing the Antenna, BCT-10 Antenna, Flexible Mobile Antenna

Page 6

Installation

Installing the Antenna

BCT-10 Antenna

1.Pinch the sides of the antenna and attach it to

the BCT-10.

HIGHWAY

SYSTEM

ALARM MUTE

HOLD

STATE

MODE

L/0

Flexible Mobile Antenna

1. Mount the antenna on the inside of the windshield at the far right-hand (passenger) side.

Caution: Be sure the antenna does not obstruct the driver’s vision in any way.

2.Route the antenna cable down the edge of the windshield and around the dash.

6

Image 6

Contents Features IntroductionWelcome Mobile Extender Terms and DefinitionsFrequency ScanningUnpacking Included with Your BCT-10 Scanner Installation Helpful TipsInstalling the Antenna BCT-10 AntennaFlexible Mobile Antenna Mounting the BCT-10 Visor MountingUnit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Connecting the Power Direct ConnectionUsing the Cigarette Lighter Adapter Connecting the PowerReplacing the Fuse Applying Power Operating InstructionsAdjusting the Squelch Strong Signals Medium Signals Weak Signals NoiseOperating Instructions Selecting the State State Codes Code StateSelecting the Frequencies to Scan Scanning All FrequenciesScanning Highway Patrol Frequencies Scanning All Police Frequencies Highway Patrol Alarm Setting the Highway Patrol Alarm RangeSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Memory Backup BirdiesTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers