Uniden BCT-10 manual Setting the Highway Patrol Alarm Range

Operating Instructions

Highway Patrol Alarm

In most cases, when you are

within three miles of a	MUTE	04
	HOLD
highway patrol unit, and a
mobile extender is in use,	MUTE	HP
your BCT-10 will set off a	HOLD
visual and audible alarm. The
signal strength will be
displayed, and the LED will	Strength	Duration
return to the HP display. The
	1 - 2	3 Minutes
time the ALARM LED will	3 - 5	2 Minutes
stay on depends on the	6 - 8	1 Minute
	9	30 Seconds

signal strength.

Setting the Highway Patrol Alarm Range

A range setting is always active for the highway patrol alert. You can set the range for either standard or long range. Signal strength is measured from 1- 9. In standard mode, only signals above a level 5 strength will trigger an audible alert tone. In long range mode, all signal strengths from 1- 9 will trigger an alert tone. To select the range:

1.Press and Hold the M for 2 seconds.

key	HIGHWAY
	SYSTEM
ALARM	MUTE	MODE
HOLD	STATE	L/0

23