Uniden manual Mounting the BCT-10, Visor Mounting

Page 7

Installation

Caution: Be sure the cable is out of the way of anyone getting in or out of the car.

3. Plug the cable’s BNC connector into the BCT-10.

HIGHWAY

SYSTEM

ALARM MUTE MODE

HOLD

STATE

L/0

Mounting the BCT-10

Visor Mounting

1. Snap the visor clip onto the BCT-10.

SQUELCH

Slots

Note: Make sure that the bracket tabs fit securely in the slots.

7

Image 7

Contents Introduction FeaturesWelcome Scanning Terms and DefinitionsFrequency Mobile ExtenderUnpacking Included with Your BCT-10 Scanner Helpful Tips InstallationBCT-10 Antenna Installing the AntennaFlexible Mobile Antenna Visor Mounting Mounting the BCT-10Unit and the visor mount off and on the visor Windshield Mounting Snap the windshield mounting clip onto the BCT-10 Squelch Direct Connection Connecting the PowerConnecting the Power Using the Cigarette Lighter AdapterReplacing the Fuse Operating Instructions Applying PowerStrong Signals Medium Signals Weak Signals Noise Adjusting the SquelchOperating Instructions Selecting the State Code State State CodesScanning All Frequencies Selecting the Frequencies to ScanScanning Highway Patrol Frequencies Scanning All Police Frequencies Setting the Highway Patrol Alarm Range Highway Patrol AlarmSetting the Highway Patrol Alarm Volume Muting the Highway Patrol Alarm You hear a two beeps and the Mute LED comes on Monitoring Weather Frequencies Deleting Frequencies Restoring Deleted Frequencies Using Hold to Stay on a Selected Frequency Birdies Memory BackupTroubleshooting Optional Accessories Specifications BCT-10 Precautions Controls and Indicators Contents One Year Limited Warranty PAT. Under ONE or More of the Following Patent Numbers