Uniden BC785D manual ID tag Bank04 MOT TYP2, Setting the Delay Mode for Trunking Mode, Reverse Key

Page 58

Reverse Key

For Motorola and EDACS system; to change your display between the Scan List indicators and trunk bank display, press RVRS.

ID SCAN 867.9875 NFM Bank 1234567890 BANK:10 MOTTYP2

ID SCAN 867.9875 NFM List 1234567890

For LTR systems only, the talkgroup must be active in order to change the Scan List and bank indicators. If the talkgroup is not active, change the Scan List by using the Menu screen.

Setting the Delay Mode for Trunking Mode

The delay time is automatically set for each talkgroup for ID Scan mode and ID Search mode. The setting periods can be changed. To set the delay feature, enter into the Menu mode.

1.Press MENU.

2.Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E.

3.Select the bank number by rotating the VFO and pressing E.

4.Select 4:DELAY and then press E.

5.Select a delay time (see page 32) and then press E.

Note: If you want to verify the Delay mode setting, press and hold MENU for 2 seconds in Trunking mode.

Setting Priority in Trunking Mode

You can set priority in your trunking lists, just as you do in your conventional ones. You can set the priority by pressing and holding PRI for 2 seconds in ID Scan Hold mode.

After you’ve set up your Scan List, press PRI to activate it.

It’s very similar to conventional priority although there is no "interrupt" during the transmissions. Priorities are checked in between transmissions.

With Priority ON, you can hold on an ID in your Scan List, such as Scan List 6, memory position 7, and the scanner will check all the priorities in all the active Scan Lists in between any transmissions on the ID on which you’re holding. The lowest numbered priority will be checked first. For example, the Priority ID in List 1 will be checked before the Priority in List 2, etc.

Note: This function does not work in LTR tracking.

Programming Scan Lists During Search

To select a Scan List location and store an ID during Search mode, follow these steps:

1.When your scanner stops on an ID you want to store, press

/HOLD.

MID:4128 867.8375 NFM

ID tag

Bank:04 MOT TYP2

54

Image 58
Contents Page Page Contents Edacs Scat Introduction LTRFront and Rear View BC785DIcon Description BC785D Shortcuts Entered. To begin Searching between the Range, press Srch Important Notice What is Trunk Tracking? What is Scanning?What is Searching? TerminologyWhat is Apco Project 25 Digital Communications? Feature Highlights Information on the Internet Where to Obtain More InformationScanner.uniden.com Included with Your Scanner Package Mounting an Antenna SetupConnecting an Antenna Optional AntennaTypical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation Connecting an External Speaker Desktop InstallationApplying Power Using Standard AC Power Connecting an EarphoneListening Safely Connecting the Clone CableConnecting the Tape Recorder RememberBasic Operation Setting the SquelchTurn the Scanner On Understanding the Menu System Menu Description and Numeric Keypad Equivalents Set attenuation for all search ranges 2DELAY You can assign a variety of step sizes to the channel 9I-CALLMOTOROLA/EDACS Allows you to change the brightness of the display 6CLONE 001 Storing Frequencies into Channels in Menu ModeProgramming 1FREQUENCYOUT of Band Error OUT of Channel010 512.0000 NFM C1000 0000.0000Assigning a Bank Tag to a Bank Transfer FrequenciesStoring Text Tags Assigning a Text Tag to a ChannelProgramming Tips Beep AlertAssigning the Beep Alert to a Channel Scanning Scan Hold FeatureTo directly access a specific channel ScanStoring Frequencies During Scanning RF Attenuation FeatureSetting the Delay Mode for Frequency During Scanning001 141.5000 NFM Uniden Group a Lockout in Hold ModeChannel Lockout Restoring a Locked-out Channel Lockout in Scanning ModeRestoring All Locked-out Channels 010 1240.0000 NFM Error PRI CH LockoutPriority on 001 512.0000 NFMPriority Channel Plus Scan Searching Setting a Search RangeSrch 12.5k Starting Chain Search Search Hold FeatureSrch 12.5k 1240.0000 NFM Range 25cm Amateur Grp Data SkipFrequency Skip Srch 12.5k 1240.0000 NFM Range C004Storing Search Frequencies Select Bank ErrorAuto Store CH Data FullFor Search mode, select 1SERVICE Option / Chain Search 003 001 512.0000 NFM Ctcss 250.3 Bank003 512.0000 NFM Ctcss Uniden Group a Additional Menu Options for SearchingService Search 2PUBLIC Safety 3NEWSService Search Skip NWR-SAME AlertFips Code Testing the Alert SirenProgramming Fips Code Digital and Trunked Systems 001 OOOO.0000 Programming and Receiving Digital and Trunked SystemsSelecting or Changing Trunking System Type 010 Programming Trunking FrequenciesProgramming ID Scan Lists Manually M5-0 050-2¡ M5-0 4128 1216¡Enter ID E5-0 09-022¡Enter Alpha TAG M5-0 1216Receiving Trunked Systems M1-14128 867.8375 NFM ID Tag List Tag C1000 0000.0000 Bank ID Scan ModeID Scan Hold Feature Trunked SearchM1-14128 ID Monitor ModeID Search Hold and Direct Entry ID Hold Mode MOT ID8192Review ID Lockout LT ID0-02-042ID Review Restoring Locked-out IDsID tag Bank04 MOT TYP2 Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Programming Scan Lists During SearchMoving between Scan List Memories MOT ID LIST01 No.01 M1-1 851.0375 NFMDeleting a Stored ID Call Motorola/EDACSMulti-Track TalkgroupsMulti-Track Operational Details Edacs Reception Edacs TrackingSpecial Edacs Features An Edacs Trunked systemEmergency Call Alert Edacs Scat LTR Reception LTR TrackingMotorola Reception Motorola Tracking001 867.8375 NFM NFM Select Fleet MAP Preset1TYPE2 NFM Block 0 Size Code Programming a Hybrid System50.0 Control Channel Only ModeToggling the Status Bit Disconnect Tone Detect Option End Code Installing the Apco P-25 card Apco Project 25 ReceptionPrecautions for Installing the BCi25D Card Turning ON/OFF the Apco P-25 CardSound QULTY0050 Apco P-25 Sound Quality Fine TuningThreshold Adjustment Range 867.8375 P25 Low Mid Upp 0533 1985Page To connect Scanner to PC PC Control ModeRemote Interface To program your scannerSpeed 39600 bps 419200 bps 5OFF Clone ModeStart Remote Mode and Change Transfer Speed Scanner.uniden.com PC Control ParameterTo connect the Scanner to Scanner Clone Master Unit Slave Unit CloneEnter Lock Additional FeaturesDimmer Key Beep OptionFrequency and Channel Tuning with the VFO Control Reverse ModeReceiving Mode Selection Channel Step SelectionCare and Maintenance Troubleshooting Problem Suggestion Specifications Glossary of Terms Page Page Preset Fleet Maps AppendixPreset Map Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code RestrictionsNWR-SAME Event Code Reverse List Ctcss Frequency List Hz DCS Tone CodeBC785D Flow Charts Scan Option Conventional System Option Dimmer One Year Limited Warranty Uniden America Corporation