Uniden BC785D manual

4.Once you have adjusted the Sound Quality to the lowest possible level, press the E key.

Press the RSM key to exit the Sound Quality Adjustment Mode.

*To cancel the adjusted threshold level, press . (Decimal) key.

*The adjusted threshold level for the current frequency can be set back to the default value by pressing and holding the . (Decimal) key.

*When you change the Sound Quality it affects all other APCO P-25 signals in that same band. (UHF, VHF, or 800MHz)

*You cannot enter the “Sound Quality Fine Tuning” mode when the scanner is operating as follows:

1)The receiving frequency is 0 MHz.

2)Air Band Frequency

3)BCi25D card is not inserted

4)BCi25D / P-25 monitoring is disabled

71