Uniden BC785D manual 010 512.0000 NFM, Error OUT of Channel, OUT of Band, C1000 0000.0000

Note: • You can also ▲ or ▼ when selecting a channel. Press and hold ▲ or ▼ for 1second to move up/down more quickly.

•To clear a mistake while entering the frequency, press . (decimal key) repeatedly until the display is cleared.

•If you enter a channel or frequency which is out of the scanner’s range, a beep will sound and ERROR appears on the display.

•For each channel, you can also change the step size or the mode. (See page 93).

☞Remember! You can also use ▲ or ▼ instead of rotating the VFO.

Also instead of pressing E, you can press the VFO control.

Deleting a Stored Frequency

To delete a stored frequency: a. Select a channel.

b. Press 0.

c. Then press E.

Note: Channels with no frequencies are automatically locked out.

C 010

512.0000 NFM

ERROR

OUT OF CHANNEL

C 010

512.0000 NFM

OUT OF BAND

C1000

0000.0000

Editing a Stored Frequency

1.Press MENU.

2.Select 2:SCAN OPTION / 1:CONVENTIONAL by rotating the VFO and pressing E.

3.Select the channel number you want to edit by rotating the VFO and pressing E.

4.Select 1:FREQUENCY by rotating the VFO and pressing E.

5. Edit the frequency by using . (decimal key) and the keypad and pressing E.

☞Remember! You can also use ▲ or ▼ instead of rotating the VFO. Also instead of pressing E, you can press the VFO control.

Duplicate Frequency Alert

If you enter a frequency which has been stored in another channel, you will hear a beep and the channel stored displays WARNING.

Press . (decimal key) to clear and start again.

––– OR –––

Press E again to store the frequency in both channels.

C 010

512.0000 NFM

WARNING DUPLICATE 017

27