Vanguard Managed Solutions 6500 PLUS installation manual Replacing ID Modules

Replacing Processor Card Components

Replacing ID Modules

Replace the ID Perform these steps to replace the ID Module:

Module

Step Action

1Remove the card from the nest or enclosure.

2Locate the ID Module (Figure 2-17)and note the location of the notch, which is toward the front of the card.

This will help you orient the new chip.

3Using a standard chip-puller, remove the ID Module.

4Insert the new ID Module into the socket. Be sure that the notch in the chip is oriented toward the front of the card.

Installation 2-63