Panasonic KX-TDE100 manual When country/area data do not match

Page 14

2.1.1 Installing and Starting the Maintenance Console

7.When country/area data do not match:

a.Click OK to replace the country/area data of the PBX. Replacement may take several minutes to complete.

b.Follow the procedure described in Section "3.16.1 Starting the PBX (for KX-TDE100/ KX-TDE200)" or Section "3.18.1 Starting the PBX (for KX-TDE600)" in the Installation Manual and restart the PBX.

c.Repeat step 5 to reconnect the Maintenance Console to the PBX.

8.Follow the instructions of the Quick Setup wizard for the basic items in Quick Setup—Step 1 to 3.

9.In Quick Setup—Step 4, the IP addressing information for the IPCMPR/IPCEMPR card can be assigned automatically through a DHCP server or entered manually.

When using a DHCP server:

a.Select Enable for the DHCP Client setting.

b.Click Apply.

Note

The boxes will turn grey and the IP addresses will be assigned automatically after the PBX is reset.

When not using a DHCP server:

a.Select Disable for the DHCP Client setting.

b.For KX-TDE100/KX-TDE200, type the IP address of the IPCMPR card in the IP Address for IPCMPR Card box. For KX-TDE600, type the IP address of the IPCEMPR card in the IP Address for IPCEMPR Card box.*1

c.In the IP Address for VoIP-DSPbox, type the IP address of the DSP16 or DSP64 card.*2

d.In the Subnet Mask box, type the subnet mask address of the network.*3

e.In the Default Gateway box, type the IP address of the default gateway.*4

f.Click Apply.

When using a DHCP server to obtain a DNS server IP address automatically:

a.Select DHCP for the DNS Server Address Method setting.

b.Click Apply.

Note

The boxes will turn grey and the IP addresses will be assigned automatically after the PBX is reset.

14

Programming Manual for Virtual SIP Trunk Card

Image 14

Contents Programming Manual for Virtual SIP Trunk Card Pure IP-PBXTable of Contents Section Overview SIPGW16 Connection Outline Information about IP Telephony ServiceRequirements for Internet Telephony Service Information about IP Telephony Service WAN Firewall Requirements Important Notice for Subscription and InstallationPort Requirements Required Ports for Each ChannelRequired Bandwidth for Each Channel Bandwidth RequirementsRouter Requirements Specifications Items SpecificationSpecifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance ConsoleInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click SlotProgramming the V-SIPGW16 Card Programming Port Property Accessing Port PropertiesProgramming the V-SIPGW16 Card-Port Property Main Account User Name Authentication IDAuthentication Password Register Sending Interval RegisterRegister Ability Registrar Server-Name Un-Register Ability when port INS4 NAT Registrar Server-IP AddressStun Server-IP Address OptionStun Server-Name Stun Server Port NumberSession Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require OptionFrom Header-User Part Calling PartyHeader Type Called Party Voice/FAX TypePacket Sampling Time G.711µ IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A FAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit RateRTP QoS-ToS Priority 9 RTP/RTCPRTP QoS Ability 10 T.38 FAX Udptl Redundancy count for T.30 messages FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for dataFAX QoS Available 11 T.38 OptionFAX Rate Management Method FAX QoS-ToS PriorityFAX QoS-DSCP 12 DSPFAX QoS-ToS Type FAX QoS-HEXSupplementary Service Cnip Send Cnip ReceiveValue Range Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Programming Card PropertyManual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming Shelf Property Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property SIP Client Port NumberNAT Keep Alive Packet Type NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Sending IntervalSIP Called Party Number Check Ability Stun External Address Detection Retry CounterStun Resending Interval Symmetric Response Routing AbilityTimer SIP T1Timer Section Maintenance To import provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To export provider profilesTo transfer trace data to the PC SIPGW16 Protocol TraceTo save trace data to the SD Memory Card SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0

Related manuals

Manual 250 pages 16.25 Kb

Manual 214 pages 62.01 Kb

Manual 252 pages 50.17 Kb