Panasonic KX-TDE100 Session Refresh Session Timer-Session Timer Ability, Proxy-Require Option

Page 25

3.1.5 Option

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

Session Refresh (Session Timer)—Session Timer Ability

Enables the PBX to periodically refresh SIP sessions by sending repeated requests.

Value Range

Disable: This feature is not activated.

Enable (Active): Activates this feature only if the other device supports the feature.

Enable (Passive): Activates this feature only when requested by the other device.

Session Refresh (Session Timer)—Session Expire Timer

Specifies the length of time that the PBX waits before terminating SIP sessions when no reply to the repeated requests is received.

Value Range

90–3600 s

Session Refresh (Session Timer)—Refresh Method

Specifies the type of request that the PBX sends to periodically refresh SIP sessions.

Value Range

UPDATE, re-INVITE

Proxy-Require Option

Specifies option tags in a Proxy-Require header field so that the SIP server is notified that the client is behind a router with NAT enabled and firewall.

Value Range

Max. 100 characters

Programming Manual for Virtual SIP Trunk Card

25

Image 25

Contents Pure IP-PBX Programming Manual for Virtual SIP Trunk CardTable of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Port Requirements Important Notice for Subscription and InstallationFirewall Requirements Required Ports for Each ChannelRouter Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Items Specification SpecificationsSpecifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating InstructionsInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBXProgramming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval 4 NAT Un-Register Ability when port INSRegistrar Server-Name Registrar Server-IP AddressStun Server-Name OptionStun Server-IP Address Stun Server Port NumberSession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Refresh Method Proxy-Require OptionHeader Type Calling PartyFrom Header-User Part Called Party Type Voice/FAXPacket Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Voice Activity Detection for G.711 Packet Sampling Time G.729AFAX Sending Method Maximum Bit RateRTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Max Datagram FAX Udptl Error Correction RedundancyFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for dataFAX Rate Management Method 11 T.38 OptionFAX QoS Available FAX QoS-ToS PriorityFAX QoS-ToS Type 12 DSPFAX QoS-DSCP FAX QoS-HEXSupplementary Service Cnip Receive Cnip SendValue Range Programming the V-SIPGW16 Card-Card Property Accessing Card PropertiesCard Property Programming Card PropertyManual Preferred DNS Server IP Address DNS Retry Interval TimerManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming the V-SIPGW16 Card-Shelf Property Accessing Shelf PropertiesProgramming Shelf Property SIP Client Port NumberNAT Keep Alive Packet Sending Ability NAT Voice RTP UDP Port NoNAT Keep Alive Packet Type NAT Keep Alive Packet Sending IntervalStun Resending Interval Stun External Address Detection Retry CounterSIP Called Party Number Check Ability Symmetric Response Routing AbilitySIP T1 TimerTimer Section Maintenance Importing/Exporting V-SIPGW16 Provider Profiles Configuration ManagementTo import provider profiles To export provider profilesTo save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0

Related manuals

Manual 250 pages 16.25 Kb

Manual 214 pages 62.01 Kb

Manual 252 pages 50.17 Kb