Panasonic KX-TDE100 manual IP Codec Priority-1st, 2nd, 3rd, Packet Sampling Time G.711A

Page 29

3.1.8 Voice/FAX

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

Click the desired cell in the column.

Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

IP Codec Priority—1st, 2nd, 3rd

Specifies the priority of the CODECs to be used. None is only available for 2nd and 3rd priorities.

Value Range

G.711A, G.711µ, G.729A, None

Packet Sampling Time (G.711A)

Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller this number, the higher the quality of the transmitted sound.

Value Range

10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms

Packet Sampling Time (G.711µ)

Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller this number, the higher the quality of the transmitted sound.

Value Range

10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms

Programming Manual for Virtual SIP Trunk Card

29

Image 29
Contents Pure IP-PBX Programming Manual for Virtual SIP Trunk CardTable of Contents Section Overview SIPGW16 Connection Outline Information about IP Telephony ServiceRequirements for Internet Telephony Service Information about IP Telephony Service WAN Port Requirements Important Notice for Subscription and InstallationFirewall Requirements Required Ports for Each ChannelRequired Bandwidth for Each Channel Bandwidth RequirementsRouter Requirements Items Specification SpecificationsSpecifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating InstructionsInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBXProgramming the V-SIPGW16 Card Programming Port Property Accessing Port PropertiesProgramming the V-SIPGW16 Card-Port Property Main Account User Name Authentication IDAuthentication Password Register Sending Interval RegisterRegister Ability 4 NAT Un-Register Ability when port INSRegistrar Server-Name Registrar Server-IP AddressStun Server-Name OptionStun Server-IP Address Stun Server Port NumberSession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Refresh Method Proxy-Require OptionFrom Header-User Part Calling PartyHeader Type Called Party Type Voice/FAXPacket Sampling Time G.711µ IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A Voice Activity Detection for G.711 Packet Sampling Time G.729AFAX Sending Method Maximum Bit RateRTP QoS-ToS Priority 9 RTP/RTCPRTP QoS Ability 10 T.38 FAX Max Datagram FAX Udptl Error Correction RedundancyFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for dataFAX Rate Management Method 11 T.38 OptionFAX QoS Available FAX QoS-ToS PriorityFAX QoS-ToS Type 12 DSPFAX QoS-DSCP FAX QoS-HEXSupplementary Service Cnip Receive Cnip SendValue Range Programming the V-SIPGW16 Card-Card Property Accessing Card PropertiesCard Property Programming Card PropertyManual Preferred DNS Server IP Address DNS Retry Interval TimerManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming the V-SIPGW16 Card-Shelf Property Accessing Shelf PropertiesProgramming Shelf Property SIP Client Port NumberNAT Keep Alive Packet Sending Ability NAT Voice RTP UDP Port NoNAT Keep Alive Packet Type NAT Keep Alive Packet Sending IntervalStun Resending Interval Stun External Address Detection Retry CounterSIP Called Party Number Check Ability Symmetric Response Routing AbilitySIP T1 TimerTimer Section Maintenance Importing/Exporting V-SIPGW16 Provider Profiles Configuration ManagementTo import provider profiles To export provider profilesTo transfer trace data to the PC SIPGW16 Protocol TraceTo save trace data to the SD Memory Card SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0
Related manuals
Manual 250 pages 16.25 Kb Manual 214 pages 62.01 Kb Manual 252 pages 50.17 Kb