Panasonic KX-TDE100 Installing the V-SIPGW16 Card to the PBX, Under Configuration, click Slot

Page 16

2.2 Installing the V-SIPGW16 Card to the PBX

2.2Installing the V-SIPGW16 Card to the PBX

1.a. Under Configuration, click Slot.

b.Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

c.Click Select Shelf.

2.a. Click on the name of the V-SIPGW16card. An image of the card will be displayed.

b.Drag the image of the card to a Trunk slot and release it. The card will move into the slot space.

3.Click Yes to confirm.

16

Programming Manual for Virtual SIP Trunk Card

Image 16
Contents Programming Manual for Virtual SIP Trunk Card Pure IP-PBXTable of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Important Notice for Subscription and Installation Port RequirementsFirewall Requirements Required Ports for Each ChannelRouter Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Specifications Items SpecificationSpecifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance ConsoleInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click SlotProgramming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval Un-Register Ability when port INS 4 NATRegistrar Server-Name Registrar Server-IP AddressOption Stun Server-NameStun Server-IP Address Stun Server Port NumberSession Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require OptionHeader Type Calling PartyFrom Header-User Part Called Party Voice/FAX TypePacket Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Packet Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit RateRTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Udptl Error Correction Redundancy FAX Max DatagramFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for data11 T.38 Option FAX Rate Management MethodFAX QoS Available FAX QoS-ToS Priority12 DSP FAX QoS-ToS TypeFAX QoS-DSCP FAX QoS-HEXSupplementary Service Cnip Send Cnip ReceiveValue Range Accessing Card Properties Programming the V-SIPGW16 Card-Card PropertyCard Property Programming Card PropertyDNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Accessing Shelf Properties Programming the V-SIPGW16 Card-Shelf PropertyProgramming Shelf Property SIP Client Port NumberNAT Voice RTP UDP Port No NAT Keep Alive Packet Sending AbilityNAT Keep Alive Packet Type NAT Keep Alive Packet Sending IntervalStun External Address Detection Retry Counter Stun Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing AbilityTimer SIP T1Timer Section Maintenance Configuration Management Importing/Exporting V-SIPGW16 Provider ProfilesTo import provider profiles To export provider profilesTo save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0
Related manuals
Manual 250 pages 16.25 Kb Manual 214 pages 62.01 Kb Manual 252 pages 50.17 Kb