Panasonic KX-TDE100 manual Called Party

Page 27

3.1.7 Called Party

From Header—SIP-URI

Specifies the complete SIP-URI address of the From header. The configuration in From Header—User Part will be invalid if this parameter is set.

Value Range

Max. 100 characters

P-Preferred-Identity Header—User Part

Specifies the value to be stored in the username part of the SIP-URI of the P-Preferred-Identity header.

Value Range

User Name, Authentication ID, PBX-CLIP

P-Preferred-Identity Header—SIP-URI

Specifies the complete SIP-URI address of the P-Preferred-Identity header. The configuration in P-Preferred-IdentityHeader—User Part will be invalid if this parameter is set.

Value Range

Max. 100 characters

Number Format

Selects the format of the CLIP number to be sent to the called party.

Value Range

International, +International, National

Remove Digit

Specifies the number of leading digits of the CLIP number to be removed. This setting is compulsory when PBX-CLIPis selected in From Header—User Part or P-Preferred-IdentityHeader—User Part.

Value Range

0–32

Additional Dial

Specifies the number to be added to the CLIP number in the place of the removed digits. This setting is compulsory when PBX-CLIPis selected in From Header—User Part or P-Preferred-IdentityHeader—User Part.

Value Range

Max. 20 digits (containing of 0–9, *, and #)

3.1.7 Called Party

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Programming Manual for Virtual SIP Trunk Card

27

Image 27
Contents Pure IP-PBX Programming Manual for Virtual SIP Trunk CardTable of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Required Ports for Each Channel Important Notice for Subscription and InstallationPort Requirements Firewall RequirementsBandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Items Specification SpecificationsSpecifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating InstructionsInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBXProgramming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Registrar Server-IP Address Un-Register Ability when port INS4 NAT Registrar Server-NameStun Server Port Number OptionStun Server-Name Stun Server-IP AddressProxy-Require Option Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Refresh MethodCalling Party Header TypeFrom Header-User Part Called Party Type Voice/FAXIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ Maximum Bit Rate Packet Sampling Time G.729AVoice Activity Detection for G.711 FAX Sending Method9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for data FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for T.30 messagesFAX QoS-ToS Priority 11 T.38 OptionFAX Rate Management Method FAX QoS AvailableFAX QoS-HEX 12 DSPFAX QoS-ToS Type FAX QoS-DSCPSupplementary Service Cnip Receive Cnip SendValue Range Programming Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Card PropertyManual DNS Server Port Number DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual Alternate DNS Server IP AddressDNS SRV Record Resolve Ability SIP Client Port Number Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property Programming Shelf PropertyNAT Keep Alive Packet Sending Interval NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet TypeSymmetric Response Routing Ability Stun External Address Detection Retry CounterStun Resending Interval SIP Called Party Number Check AbilitySIP T1 TimerTimer Section Maintenance To export provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To import provider profilesSIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0
Related manuals
Manual 250 pages 16.25 Kb Manual 214 pages 62.01 Kb Manual 252 pages 50.17 Kb