Panasonic KX-TDE100 manual SIPGW16 Protocol Trace, To save trace data to the SD Memory Card

Page 49

4.1.2 V-SIPGW16 Protocol Trace

4.1.2 V-SIPGW16 Protocol Trace

The trace data of protocol activity can be collected from the V-SIPGW16 card and saved to the PC, using the utility, V-SIPGW16 Protocol Trace.

This option requires that the target V-SIPGW16 card be set to INS status. Follow the steps below to trace and file V-SIPGW16 card protocol activity:

Note

To access the following menu options, you must be logged in to the Maintenance Console in Batch or Interactive mode at Installer level. For details about the software mode and access level, refer to the On-line Help.

To save trace data to the SD Memory Card

1.From the Utility menu, select V-SIPGW16 Protocol Trace.

When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the SD Memory Card (file name: "PRTSIPC").

To transfer trace data to the PC

1.From the Utility menu, select File Transfer PBX (SD Card) to PC. The list of trace data files will be displayed.

2.Select the desired trace data file.

3.Click Transfer.

4.Navigate to the folder in which you want to save the file.

5.Enter a file name.

6.Click Save.

7.Click OK.

Programming Manual for Virtual SIP Trunk Card

49

Image 49
Contents Pure IP-PBX Programming Manual for Virtual SIP Trunk CardTable of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Port Requirements Important Notice for Subscription and InstallationFirewall Requirements Required Ports for Each ChannelRouter Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Items Specification SpecificationsSpecifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating InstructionsInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBXProgramming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval 4 NAT Un-Register Ability when port INSRegistrar Server-Name Registrar Server-IP AddressStun Server-Name OptionStun Server-IP Address Stun Server Port NumberSession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Refresh Method Proxy-Require OptionHeader Type Calling PartyFrom Header-User Part Called Party Type Voice/FAXPacket Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Voice Activity Detection for G.711 Packet Sampling Time G.729AFAX Sending Method Maximum Bit RateRTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Max Datagram FAX Udptl Error Correction RedundancyFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for dataFAX Rate Management Method 11 T.38 OptionFAX QoS Available FAX QoS-ToS PriorityFAX QoS-ToS Type 12 DSPFAX QoS-DSCP FAX QoS-HEXSupplementary Service Cnip Receive Cnip SendValue Range Programming the V-SIPGW16 Card-Card Property Accessing Card PropertiesCard Property Programming Card PropertyManual Preferred DNS Server IP Address DNS Retry Interval TimerManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming the V-SIPGW16 Card-Shelf Property Accessing Shelf PropertiesProgramming Shelf Property SIP Client Port NumberNAT Keep Alive Packet Sending Ability NAT Voice RTP UDP Port NoNAT Keep Alive Packet Type NAT Keep Alive Packet Sending IntervalStun Resending Interval Stun External Address Detection Retry CounterSIP Called Party Number Check Ability Symmetric Response Routing AbilitySIP T1 TimerTimer Section Maintenance Importing/Exporting V-SIPGW16 Provider Profiles Configuration ManagementTo import provider profiles To export provider profilesTo save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0
Related manuals
Manual 250 pages 16.25 Kb Manual 214 pages 62.01 Kb Manual 252 pages 50.17 Kb