Panasonic KX-TDE100 Programming the V-SIPGW16 Card-Shelf Property, Accessing Shelf Properties

Page 42

3.3.1 Main

3.3Programming the V-SIPGW16 Card—Shelf Property

Common settings for all of the V-SIPGW cards installed in the IPCMPR (for KX-TDE100/KX-TDE200)/ IPCEMPR (for KX-TDE600) Virtual Shelf can be programmed.

Accessing Shelf Properties

1.Under Configuration, click Slot.

2.Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

3.Click Select Shelf.

4.Move the mouse pointer over the V-SIPGW16card.

5.Click Shelf Property.

Programming Shelf Property

Icon Description

In this section, the following icons show the different parameter type.

Icon

Not marked

Description for Parameter Type

Manual programming is compulsory under certain conditions.

Manual programming is optional.

3.3.1 Main

SIP Client Port Number

Specifies the port number of the PBX used for communications with the SIP server.

Value Range

1–65535

NAT Traversal

Specifies the NAT traversal method.

–STUN: A STUN Server, used alongside the SIP Server, finds out the global IP address of the router with NAT enabled.

–Fixed IP Address: The global IP address of the router with NAT enabled is fixed.

Note

Manual programming is optional except when programming is required depending on the network conditions.

Value Range

Off, Fixed IP Addr., STUN

42

Programming Manual for Virtual SIP Trunk Card

Image 42

Contents Programming Manual for Virtual SIP Trunk Card Pure IP-PBXTable of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Firewall Requirements Important Notice for Subscription and InstallationPort Requirements Required Ports for Each ChannelBandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Specifications Items SpecificationSpecifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance ConsoleInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click SlotProgramming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Registrar Server-Name Un-Register Ability when port INS4 NAT Registrar Server-IP AddressStun Server-IP Address OptionStun Server-Name Stun Server Port NumberSession Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require OptionCalling Party Header TypeFrom Header-User Part Called Party Voice/FAX TypeIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ FAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit Rate9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for T.30 messages FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for dataFAX QoS Available 11 T.38 OptionFAX Rate Management Method FAX QoS-ToS PriorityFAX QoS-DSCP 12 DSPFAX QoS-ToS Type FAX QoS-HEXSupplementary Service Cnip Send Cnip ReceiveValue Range Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Programming Card PropertyManual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming Shelf Property Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property SIP Client Port NumberNAT Keep Alive Packet Type NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Sending IntervalSIP Called Party Number Check Ability Stun External Address Detection Retry CounterStun Resending Interval Symmetric Response Routing AbilityTimer SIP T1Timer Section Maintenance To import provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To export provider profilesSIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0

Related manuals

Manual 250 pages 16.25 Kb

Manual 214 pages 62.01 Kb

Manual 252 pages 50.17 Kb