Panasonic KX-TDE100 Configuration Management, Importing/Exporting V-SIPGW16 Provider Profiles

Page 48

4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles

4.1 Configuration Management

4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles

Provider profiles for the V-SIPGW16 card can be exported or imported (if updated provider profiles are available), using the Import/Export tool.

Follow the steps below to import or export the provider profiles:

Note

To access the following menu options, you must be logged in to the Maintenance Console in Batch or Interactive mode at Installer level. For details about the software mode and access level, refer to the On-line Help.

To import provider profiles

1.From the Tool menu, point to Import, and then click V-SIPGW16 Provider to import.

2.Navigate to the folder containing the provider profiles you want to open.

3.Select the file.

4.Click Open to open the file.

5.Click OK.

To export provider profiles

1.From the Tool menu, point to Export, and then click V-SIPGW16 Provider to export.

2.Navigate to the folder in which you want to save the file.

3.Enter a file name.

4.Click Save.

5.Click OK.

48

Programming Manual for Virtual SIP Trunk Card

Image 48
Contents Programming Manual for Virtual SIP Trunk Card Pure IP-PBXTable of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Important Notice for Subscription and Installation Port RequirementsFirewall Requirements Required Ports for Each ChannelBandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Specifications Items SpecificationSpecifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance ConsoleInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click SlotProgramming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Un-Register Ability when port INS 4 NATRegistrar Server-Name Registrar Server-IP AddressOption Stun Server-NameStun Server-IP Address Stun Server Port NumberSession Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require OptionCalling Party Header TypeFrom Header-User Part Called Party Voice/FAX TypeIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ Packet Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit Rate9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Error Correction Redundancy FAX Max DatagramFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for data11 T.38 Option FAX Rate Management MethodFAX QoS Available FAX QoS-ToS Priority12 DSP FAX QoS-ToS TypeFAX QoS-DSCP FAX QoS-HEXSupplementary Service Cnip Send Cnip ReceiveValue Range Accessing Card Properties Programming the V-SIPGW16 Card-Card PropertyCard Property Programming Card PropertyDNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Accessing Shelf Properties Programming the V-SIPGW16 Card-Shelf PropertyProgramming Shelf Property SIP Client Port NumberNAT Voice RTP UDP Port No NAT Keep Alive Packet Sending AbilityNAT Keep Alive Packet Type NAT Keep Alive Packet Sending IntervalStun External Address Detection Retry Counter Stun Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing AbilityTimer SIP T1Timer Section Maintenance Configuration Management Importing/Exporting V-SIPGW16 Provider ProfilesTo import provider profiles To export provider profilesSIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0
Related manuals
Manual 250 pages 16.25 Kb Manual 214 pages 62.01 Kb Manual 252 pages 50.17 Kb