Panasonic KX-TDE100 manual 9 RTP/RTCP, RTP QoS Ability, RTP QoS-ToS Priority

Page 31

3.1.9 RTP/RTCP

Note

Manual programming is required if DTMF is set to Outband (RFC2833).

Value Range

96–127

3.1.9 RTP/RTCP

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

RTP QoS Ability

Specifies the type of value to be stored in the ToS field in the IP header.

Value Range

ToS, DSCP, HEX

RTP QoS-ToS Priority

Specifies the priority level in the ToS field.

Programming Manual for Virtual SIP Trunk Card

Image 31

Contents Pure IP-PBX Programming Manual for Virtual SIP Trunk CardTable of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Required Ports for Each Channel Important Notice for Subscription and InstallationPort Requirements Firewall RequirementsRouter Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Items Specification SpecificationsSpecifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating InstructionsInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBXProgramming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval Registrar Server-IP Address Un-Register Ability when port INS4 NAT Registrar Server-NameStun Server Port Number OptionStun Server-Name Stun Server-IP AddressProxy-Require Option Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Refresh MethodHeader Type Calling PartyFrom Header-User Part Called Party Type Voice/FAXPacket Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Maximum Bit Rate Packet Sampling Time G.729AVoice Activity Detection for G.711 FAX Sending MethodRTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for data FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for T.30 messagesFAX QoS-ToS Priority 11 T.38 OptionFAX Rate Management Method FAX QoS AvailableFAX QoS-HEX 12 DSPFAX QoS-ToS Type FAX QoS-DSCPSupplementary Service Cnip Receive Cnip SendValue Range Programming Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Card PropertyManual DNS Server Port Number DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual Alternate DNS Server IP AddressDNS SRV Record Resolve Ability SIP Client Port Number Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property Programming Shelf PropertyNAT Keep Alive Packet Sending Interval NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet TypeSymmetric Response Routing Ability Stun External Address Detection Retry CounterStun Resending Interval SIP Called Party Number Check AbilitySIP T1 TimerTimer Section Maintenance To export provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To import provider profilesTo save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0

Related manuals

Manual 250 pages 16.25 Kb

Manual 214 pages 62.01 Kb

Manual 252 pages 50.17 Kb