Panasonic KX-TDE100 manual Programming the V-SIPGW16 Card-Port Property, Accessing Port Properties

Page 18

3.1 Programming the V-SIPGW16 Card—Port Property

3.1Programming the V-SIPGW16 Card—Port Property

Various settings can be programmed for each virtual SIP gateway port. To change the status of virtual SIP gateway ports, click Command.

Accessing Port Properties

1.Under Configuration, click Slot.

2.Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

3.Click Select Shelf.

4.Move the mouse pointer over the V-SIPGW16card.

5.Click Port Property.

Programming Port Property

Some of the parameters can be automatically programmed by selecting the desired SIP provider for each virtual SIP gateway port.

Icon Description

In this section, the following icons show the different parameter type.

Icon

Not marked

Description for Parameter Type

Programmed automatically by selecting the desired SIP provider in Select Provider.

Manual programming is compulsory.

Manual programming is compulsory under certain conditions.

Manual programming is optional.

Automatic Programming

Some of the parameters on this screen can be automatically programmed by selecting the desired SIP provider for each virtual SIP gateway port. A maximum of 32 SIP providers can be programmed, and a different SIP provider can be assigned to each virtual SIP gateway port.

Follow the steps below to configure a SIP provider.

1.Click Select Provider.

A dialogue box will appear. Available virtual SIP gateway port numbers are displayed in the list.

2.From the Provider menu, select the desired SIP provider.

3.Highlight the desired port numbers or click Select All to select all the virtual SIP gateway port numbers to be assigned to the SIP provider selected in step 2.

4.Click Execute.

5.Click OK.

6.Click Apply.

Appropriate setting values designated by the SIP provider will be set in the parameters for the virtual SIP gateway ports.

Manual Programming

Follow the steps below to programme the parameters which are not automatically programmed by selecting a provider.

1.Click a desired tab.

18

Programming Manual for Virtual SIP Trunk Card

Image 18

Contents Programming Manual for Virtual SIP Trunk Card Pure IP-PBXTable of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Firewall Requirements Important Notice for Subscription and InstallationPort Requirements Required Ports for Each ChannelBandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Specifications Items SpecificationSpecifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance ConsoleInstalling the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click SlotProgramming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Registrar Server-Name Un-Register Ability when port INS4 NAT Registrar Server-IP AddressStun Server-IP Address OptionStun Server-Name Stun Server Port NumberSession Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require OptionCalling Party Header TypeFrom Header-User Part Called Party Voice/FAX TypeIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ FAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit Rate9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for T.30 messages FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for dataFAX QoS Available 11 T.38 OptionFAX Rate Management Method FAX QoS-ToS PriorityFAX QoS-DSCP 12 DSPFAX QoS-ToS Type FAX QoS-HEXSupplementary Service Cnip Send Cnip ReceiveValue Range Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Programming Card PropertyManual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Programming Shelf Property Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property SIP Client Port NumberNAT Keep Alive Packet Type NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Sending IntervalSIP Called Party Number Check Ability Stun External Address Detection Retry CounterStun Resending Interval Symmetric Response Routing AbilityTimer SIP T1Timer Section Maintenance To import provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To export provider profilesSIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0

Related manuals

Manual 250 pages 16.25 Kb

Manual 214 pages 62.01 Kb

Manual 252 pages 50.17 Kb