Panasonic WJ-NT104 operating instructions Alarm Recording, Single Frame Recording mode

Page 38

■ALARM Recording

The WJ-NT104 records images before and after an alarm is activated and notifies the user of alarm input. Alarm images can be recorded in the following three modes:

●Single Frame Recording mode

When an alarm is received, the alarm image is captured and saved as a still image after the specified delay time.

•The delay time from receiving an alarm until capture of the alarm image can be specified in the range of 0 to 10 sec- onds in increments of 100 ms.

Set delay time

Alarm activated

Single Frame Recording

Time base

●Continuous Recording [after alarm] mode

When an alarm is received, the specified number of alarm images are captured and saved after the specified delay time.

•The delay time from receiving an alarm until capture of the alarm image can be specified in the range of 0 to 10 sec- onds in increments of 100 ms.

•The number of images to save can be set to between 1 and 16 (resolution 640 x 480).

•A frame rate of 1/10, 1/5, 3/10, 1/2, 1, 2, 3, 5, or 10 can be selected.

•If another alarm is received while recording an alarm, the on-going alarm processing is suspended and the new alarm image is recorded with priority over the preceding one.

Set delay time

Alarm activated

Continuous recording

Time base

●Continuous Recording [before/after alarm] mode

Images before receiving an alarm are recorded at the preset frame rate and in the preset number of images. After an alarm is activated, the specified number of images are continuously captured and saved.

•The total number of images to be saved before and after an alarm can be set to between 1 and 16 (resolution 640 x 480).

•A frame rate of 1/10, 1/5, 3/10, 1/2, 1, 2, 3, 5, or 10 can be selected. (Frame rate 10 is not available for recording before an alarm event.)

•If another alarm is received while recording an alarm, the on-going alarm processing is suspended and the new alarm image is recorded with priority over the preceding one.

Before continuous recording

After continuous recording

Note: This mode is valid only in Fixed Input Selection mode is selected.

Alarm activated		Time base

Maximum number of recorded alarm images Differs depending on resolution and picture quality.

	Super Fine/Fine	Normal/Rough
640 x 480	16 images	24 images
640 x 240	40 images	58 images
320 x 240	89 images	123 images
160 x 120	255 images	255 images

38

Image 38

Contents Operating Instructions Lightning flash with arrowhead sym Contents Features PrefacePrecautions Handle the appliance with careFront View Rear View1RS-485 setup switches RS485 Setup Mode selector ModeSwitch Positions 2Alarm input/output port AlarmMounting one WJ-NT104 with the WV-Q204/1 InstallationsMounting in a Rack Mounting two WJ-NT104 with the WV-Q204/2Mounting two WJ-NT104s Rack mounting screws System Connections Access from a PC on the same subnetAccess from PCs via routers LAN Type ConnectionPPP Point to Point Protocol Type Connection Access from a Client PC to the WJ-NT104Access from the WJ-NT104 to a Client PC Direct connection to the WJ-NT104Connection to a Client PC via Hub PreparationsDirect Connection to a PC without Hub PC Setup Page IP Address Setting via RS-232C Connection WJ-NT104 SetupIP Address Setting via LAN Connection RS-232C Setup PPP Type Connection 1 P to P AccessSetup Procedures Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow ControlPage TCP/IP protocol Access ProceduresConnection Setup Dial-Up NetworkingPage Check TCP/IP in the Allowed network protocols field Access Procedures PPP Type Connection 2 Network Access Windows NT SetupPage Windows98 Setup Main page and Controls Main Page and Control Windows¡Multi Input Selection Mode ¡Fixed Input Selection Mode Random Input Selection ModeMulti Input Selection Mode Operation ModesFixed Input Selection Mode Sequence ModePush Mode Pull Mode and Push ModePull Mode Image Quality Picture Quality SetupImage Resolution Live image display Main page without Camera Control index1.htmlInput Select Alarm List Quad Screen Mode index4.htmlQuad Screen Mode Return to MainPan/Tilt Preset SelectMain page with Camera Control index2.html ZoomAutopan 0PRESETIris T y u Preset U i o !01PRESET 0AUTOPANAlarm Function Alarm List WindowContinuous Recording after alarm mode Alarm RecordingSingle Frame Recording mode Continuous Recording before/after alarm modeMail Notice Alarm NoticeAlarm Image Readout Panasonic Original Protocol Notice optionT y u i o !0 Setup ProceduresHow to Read Administrator Setup 0CAMERA MenuMulti Input Selection Mode Mode SetupRandom Input Selection Mode 1OUTPUT Data Rate Control 0FRAME Speed Control for Push Mode0 !1 2CAMERA Control SelectNetwork Setup I o !0Alarm Setup R t3ALARM Contact 5ALARM Notice Smtp E-MAIL1CAMERA Preset 7SENDER Name 6SERVER AddressE r t y O !0 !1 Serial Port Setup3DUPLEX Mode Modem Setup User Setup Host Setup FTP Client Setup E r0FTP ON/OFF Alarm Setup2ALARM Image File Name Setup 1TARGET DirectoryTime Date & Time SetupDate 0CAMERA Select Camera Menu SetupT y Connection Network SetupUtility Software Confirmation of the set values Camera Menu Setup OperationAccess Level Access AuthorizationControl of Access Authorization Registration Host Setup WindowUser Setup Window WJ-NT104 Authorized FunctionsExtension Functions SetupFixed Input Selection Mode WJ-FS616 Video Multiplexer Control2AUTO PAN 0FOCUS1IRIS Multi Input Selection Mode WJ-SX550A/B/C Matrix Switcher ControlRandom Input Selection Mode Connections1 !2 !3 PasswordVIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup 2IRIS 0ZOOM1FOCUS 3AUTO PANSelection Mode WJ-DR200 AV Disk Recorder ControlTyu 0!5!1!6!2!7!3!8 Setup Control OperationAlarm REC Standby Index2PLAY 0REVERSE Play1STOP 4RECWJ-HD100 Digital Disk Recorder Control E r 1 !2 !3 @4 @3 @22TIME 0SET1DATE 3SEARCHWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 4DOWN 0LEFT1ESC 6SETContents Upload CGI function for image display Control by Html DescriptionImage Display Html Sample File mainview1.htmlCGI functions related to camera operation Camera OperationHtml Sample File nsmainview1.html Html HEAD/HEAD Body BGCOLOR=#FFFFCC CenterHtml Sample File mainpanel1.html Html Head Body BGCOLOR=#FFFFCC Center Titele Logo ImageFont Body Html Quad ScreenScript Center Html Sample File 2 camctrl.html Html Body BGCOLOR=#FFFFCC CenterHtml Sample File almctrl.html Alarm OperationCGI functions related to alarm Cgi-bin/chconv Substitute Character Strings in Http ServerOrdinary Html file get Cgi-bin/almctrl Troubleshooting Ping IP address set in the WJ-NT104Monitoring Browser PeripheralsNetwork System Cctv Camera optionInput and Output SpecificationsGeneral HTTP, TCP/IP, PPP, FTP, SmtpPanasonic Canada Inc