Panasonic WJ-NT104 operating instructions Modem Setup

■MODEM SETUP

On the ADMINISTRATOR SETUP PAGE, click the MODEM button to display the MODEM/TA SETUP window. Select the modem or TA (terminal adapter) for the PPP connection.

q w

e r t y u

i

o

qMODEM MODELS

Set a modem mode. Depending on the set value, the modem initializing command is issued. Select manual setting or standard modem.

The factory default setting is MANUAL SETTING.

wMODEM INITIALIZE COMMAND

This command is valid when MANUAL SETTING is selected for MODEM MODELS.

Refer to the manual for the modem and set the initializ- ing command.

eLINE TYPE

Select the type of telephone line to use. The factory default setting is TONE.

rLOCAL TELEPHONE NUMBER

Set a telephone number for the WJ-NT104.

uLOGON PASSWORD

Set a password to log into the destination network when making calls from the WJ-NT104.

iREDIAL (NUMBER OF TIMES/INTERVAL)

In case of failure of the PPP connection, the number is redialed for the set number of times.

The factory default setting is 2 retries at intervals of 60 seconds.

oCONNECTION TIME (After alarm notice)

Set a time to automatically disconnect the line after the WJ-NT104 accesses an alarm notice recipient. The time countdown starts with completion of alarm notice processing. The factory default setting is 0 minute.

tDESTINATION TELEPHONE NUMBER

Set the destination telephone numbers in case the alarm notice function is used.

yLOGON ID

Set an ID code to log into the destination network when making calls from the WJ-NT104.

47