Panasonic WJ-NT104 operating instructions Network Setup, I o !0

Page 43

■NETWORK SETUP

On the ADMINISTRATOR SETUP PAGE click the NETWORK button to display the NETWORK SETUP window. Select LAN/PPP, and set IP address, netmask, and default gateway.

qIP ADDRESS (LAN)

Enter the IP address to be used with LAN. The factory default setting is 192.168.0.10.

wNETMASK (LAN)

Enter the netmask to be used with LAN. The factory default setting is 255.255.255.0.

eDEFAULT GATEWAY (LAN)

Enter the default gateway to be used with LAN. The factory default setting is 192.168.0.1.

rIP ADDRESS (PPP)

Enter the IP address to be used with PPP. The factory default setting is 192.168.1.10.

tNETMASK (PPP)

Enter the netmask to be used with PPP. The factory default setting is 255.255.255.0.

yDEFAULT GATEWAY (PPP)

Enter the default gateway to be used with PPP. The factory default setting is 192.168.1.1.

q

w

e

r

t

y u i o !0

iPPP MODE

•P to P ACCESS mode

To use this mode, match the IP address of the PC with the address of the WJ-NT104.

•NETWORK ACCESS mode

To use this mode, match the address of the WJ- NT104 with the address of the PC. (Independent of outgoing and incoming calls)

The factory default setting is P to P ACCESS.

oHOSTNAME

Enter the host name.

Alarm notice (e-mail) is sent in the host name specified here. The host name you enter may be different from that entered for the domain settings (DNS).

The factory default setting is WJ-NT104.

!0NETWORK TYPE Select LAN or PPP.

If PPP is marked, access via LAN is not possible.

uREMOTE IP ADDRESS

Used when PPP mode is on P to P ACCESS.

Enter the IP address of the PC which calls and access- es the WJ-NT104. The PC's IP address must be set to Obtain an IP automatically. The factory default setting is 192. 168. 1.11.

43

Image 43

Contents Operating Instructions Lightning flash with arrowhead sym Contents Preface FeaturesHandle the appliance with care PrecautionsRear View Front View2Alarm input/output port Alarm Mode selector ModeSwitch Positions 1RS-485 setup switches RS485 SetupMounting two WJ-NT104 with the WV-Q204/2 InstallationsMounting in a Rack Mounting one WJ-NT104 with the WV-Q204/1Mounting two WJ-NT104s Rack mounting screws LAN Type Connection Access from a PC on the same subnetAccess from PCs via routers System ConnectionsDirect connection to the WJ-NT104 Access from a Client PC to the WJ-NT104Access from the WJ-NT104 to a Client PC PPP Point to Point Protocol Type ConnectionDirect Connection to a PC without Hub PreparationsConnection to a Client PC via Hub PC Setup Page IP Address Setting via LAN Connection WJ-NT104 SetupIP Address Setting via RS-232C Connection Baud RATE, Data BIT, Stop BIT, PARITY, USE Flow Control PPP Type Connection 1 P to P AccessSetup Procedures RS-232C SetupPage Dial-Up Networking Access ProceduresConnection Setup TCP/IP protocolPage Check TCP/IP in the Allowed network protocols field Access Procedures Windows NT Setup PPP Type Connection 2 Network AccessPage Windows98 Setup Main Page and Control Windows Main page and ControlsOperation Modes Random Input Selection ModeMulti Input Selection Mode ¡Multi Input Selection Mode ¡Fixed Input Selection ModeSequence Mode Fixed Input Selection ModePull Mode Pull Mode and Push ModePush Mode Image Resolution Picture Quality SetupImage Quality Input Select Main page without Camera Control index1.htmlLive image display Return to Main Quad Screen Mode index4.htmlQuad Screen Mode Alarm ListZoom Preset SelectMain page with Camera Control index2.html Pan/TiltIris 0PRESETAutopan T y u U i o !0 Preset0AUTOPAN 1PRESETAlarm List Window Alarm FunctionContinuous Recording before/after alarm mode Alarm RecordingSingle Frame Recording mode Continuous Recording after alarm modePanasonic Original Protocol Notice option Alarm NoticeAlarm Image Readout Mail Notice0CAMERA Menu Setup ProceduresHow to Read Administrator Setup T y u i o !0Random Input Selection Mode Mode SetupMulti Input Selection Mode 2CAMERA Control Select 0FRAME Speed Control for Push Mode0 !1 1OUTPUT Data Rate ControlI o !0 Network SetupR t Alarm Setup6SERVER Address 5ALARM Notice Smtp E-MAIL1CAMERA Preset 7SENDER Name 3ALARM Contact3DUPLEX Mode Serial Port SetupE r t y O !0 !1 Modem Setup User Setup Host Setup E r FTP Client Setup1TARGET Directory Alarm Setup2ALARM Image File Name Setup 0FTP ON/OFFDate Date & Time SetupTime T y Camera Menu Setup0CAMERA Select Utility Software Network SetupConnection Confirmation of the set values Operation Camera Menu SetupControl of Access Authorization Access AuthorizationAccess Level WJ-NT104 Authorized Functions Host Setup WindowUser Setup Window RegistrationWJ-FS616 Video Multiplexer Control SetupFixed Input Selection Mode Extension Functions1IRIS 0FOCUS2AUTO PAN Connections WJ-SX550A/B/C Matrix Switcher ControlRandom Input Selection Mode Multi Input Selection ModeVIDEO-INPUT Number and MONITOR-OUT CHAN- NEL Setup Password1 !2 !3 3AUTO PAN 0ZOOM1FOCUS 2IRISWJ-DR200 AV Disk Recorder Control Selection ModeIndex Setup Control OperationAlarm REC Standby Tyu 0!5!1!6!2!7!3!84REC 0REVERSE Play1STOP 2PLAYE r 1 !2 !3 @4 @3 @2 WJ-HD100 Digital Disk Recorder Control3SEARCH 0SET1DATE 2TIMEWJ-HD500 Digital Disk Recorder Control 5!6!7 @8 @7 @6 6SET 0LEFT1ESC 4DOWNContents Upload Html Sample File mainview1.html Control by Html DescriptionImage Display CGI function for image displayHtml HEAD/HEAD Body BGCOLOR=#FFFFCC Center Camera OperationHtml Sample File nsmainview1.html CGI functions related to camera operationHtml Head Body BGCOLOR=#FFFFCC Center Titele Logo Image Html Sample File mainpanel1.htmlScript Center Quad ScreenFont Body Html Html Body BGCOLOR=#FFFFCC Center Html Sample File 2 camctrl.htmlCGI functions related to alarm Alarm OperationHtml Sample File almctrl.html Ordinary Html file get Substitute Character Strings in Http ServerCgi-bin/chconv Cgi-bin/almctrl Ping IP address set in the WJ-NT104 TroubleshootingCctv Camera option PeripheralsNetwork System Monitoring BrowserHTTP, TCP/IP, PPP, FTP, Smtp SpecificationsGeneral Input and OutputPanasonic Canada Inc